TRX Aftermarket Wheel and Tire pics! [size/offset]

[TRX5280]

The tire is 2" taller, but 1" of that is on top. 2" taller tire = 1" of increased height.

Correct.

 

[Robbys3m3]

Frankly wasn't expecting to ever want to do a set of 20x12's but I did with the Welds. I have another set that aren't so negative of an offset, but I'm liking these so far.

 

[screaminchicken]

37x12.5r18 Falken Wildpeaks mounted on OEM wheels.

(not after market wheels but just love the look…)

I was looking at 20's , yours looks awesome , thanks for changing my mind.

 

[TRX5280]

I was looking at 20's , yours looks awesome , thanks for changing my mind.

Thanks man! Love the meatier look as well.

 

[Malibuace]

Been reading all the posts about lifts and wheels and tires. Wanted to shout out to [email protected]. He was so responsive and gave me a great price for Vossen Wheels 20x9.5, Ridgegrappler 37x12.5R20, Eibach Pro springs 1.6 front / 1.5 rear as well as an AMP power step. I would highly recommend working with them. Can't wait to get everything installed. Thanks Nick!!!

 

[IdahoKTM]

37x12.5r18 Falken Wildpeaks mounted on OEM wheels.

(not after market wheels but just love the look…)

That looks so much better than the aftermarket 20's and 21's that everyone seems to like. I think Ram nailed it with the stock wheels. I'd have a set of 37's on my truck if they weren't so damn heavy.

 

[Birk]

Any pics with the rear spacers installed?

 

[LouDogg]

40's anyone?

 

[Loosescrews]

Glorious hack job.

 

[CustomPerformance]

40's anyone?

I like the look. Fenders would probably blow off when you hit a good railroad crossing at speed, but definitely cool looking.

 

[Dudebro]

I like the look. Fenders would probably blow off when you hit a good railroad crossing at speed, but definitely cool looking.

Was going to say the same thing. Great for a pavement princess but those fender will leave the chat with any actual use

 

[gmpirate]

Frankly wasn't expecting to ever want to do a set of 20x12's but I did with the Welds. I have another set that aren't so negative of an offset, but I'm liking these so far.

That would probably be my ultimate garage. Road trips -- covered, quick errands and adventure -- covered, night out on the town -- covered! Who needs cars.

 

[PrinceTRX]

I scanned through this thread multiple times while trying to decide on a setup for my truck. It was quite helpful. Adding mine to the pile here for others to reference. Method 304 Double Standard machined wheels 18x9 -12 offset. I went with some low profile black center caps (sold separately). Toyo Open Country MT 37x13.5x18 tires. Eibach Pro Lift front / rear spring set. This offset / tire size combo did require a little front inner fender trimming, but I knew that going in thanks to this thread.

 

[Two]

How refreshing to see wheels that aren't black, for a change!

 

[Fifty]

These are the method 706 in 18x9 +18 so supposed to be stock ish size.

Stock tires (found them for a great deal through discount tire direct. And wanted matching spares for the trailer and truck)

Anyways, in the middle of beadlocks etc etc. so tossed the methods on.

1) I dislike black wheels on the blue trucks

2) I swear these wheels sit further out than the stock wheels. But they shouldn’t.

 

[Two]

1) I dislike black wheels on the blue trucks

I dislike black wheels on anything.

Just dragged an ordered trailer home from Texas and black wheels was the only choice. So yesterday I ordered Alcoa wheels for it.

 

[916Ghost]

These are the method 706 in 18x9 +18 so supposed to be stock ish size.

Stock tires (found them for a great deal through discount tire direct. And wanted matching spares for the trailer and truck)

Anyways, in the middle of beadlocks etc etc. so tossed the methods on.

1) I dislike black wheels on the blue trucks

2) I swear these wheels sit further out than the stock wheels. But they shouldn’t.

Offset is one thing but doesn’t backspacing also have play? I wish I would have know you wanted tires! I have a factory set sitting in my garage I would have hooked you up with! 3k miles and the spare! Also have 2 brand new 37x12.50r20 nitto ridge grapplers sitting in my garage

 

[Two]

Offset is one thing but doesn’t backspacing also have play?

If the rim width is the same, no.

 

[Fifty]

Offset is one thing but doesn’t backspacing also have play? I wish I would have know you wanted tires! I have a factory set sitting in my garage I would have hooked you up with! 3k miles and the spare! Also have 2 brand new 37x12.50r20 nitto ridge grapplers sitting in my garage

I got them last year… they have been playing trailer tires for a bit.

I’ve been too lazy to swap the beadlock rings in. Still am. I need to load them up to get the beads broken because I’m just too tired for that.

 

[MontanaTRX420]

@Nitro , just a sugggestion but maybe you could make a sticky thread for the wheels and tires section where people can post pics of their trucks with various brands and sizes of wheels and tires that they have installed on their TRX. Request that people post the size, brand, and specifications of both the tires and wheels they are running. There is a similar thread on a square body forum I'm on, and it's a great reference for people to use when they want to get a visualization of how their truck might look with different wheels and tires.

Here is my contribution:

Tires: 37x13.50r20 Toyo Open Country MT
Wheels: Fuel "Rebel" 20x9 with +20mm offset
Suspension Modifications: None
Trimming required: None

Sharp. Love it.