Passive entry added to REAR doors?? *EDIT* - ACCOMPLISHED AND WORKS PERFECTLY!!!

[WhiskeyOne]

@jdduck1212 Just to confirm, you bought 2 Body Color Handles (not chrome) from the list for your paint color, and then for the 2 Handle Caps, did you buy one left, and one right? Or two rights?

 

[Any Name]

@jdduck1212 Just to confirm, you bought 2 Body Color Handles (not chrome) from the list for your paint color, and then for the 2 Handle Caps, did you buy one left, and one right? Or two rights?

I just ordered mine the other day, per jimmy07 you need to order 2 handles and 2 handle caps for the right front passenger side

 

[jdduck1212]

@jdduck1212 Just to confirm, you bought 2 Body Color Handles (not chrome) from the list for your paint color, and then for the 2 Handle Caps, did you buy one left, and one right? Or two rights?

Correct, like @Any Name said, (2) right front passenger handles and (2) right front passenger caps. The door handles and the caps are actually ambidextrous for both sides (minus the front drivers side cap because it has the key hole in it's cap. Body color- not chrome. They'll come prepainted to match your truck.

 

[WhiskeyOne]

I just ordered mine the other day, per jimmy07 you need to order 2 handles and 2 handle caps for the right front passenger side

Correct, like @Any Name said, (2) right front passenger handles and (2) right front passenger caps. The door handles and the caps are actually ambidextrous for both sides (minus the front drivers side cap because it has the key hole in it's cap. Body color- not chrome. They'll come prepainted to match your truck.

Got it. That’s what I’ve got queued up just wanted to confirm. Thanks again guys!

 

[WVU_Eric]

@jdduck1212 That video was great!

Now I'm considering the passive entry upgrade, ambient light upgrade, and going to start looking at sound deadening while I have the doors open. Anyone have a video for that?

 

[10killer75]

Anybody know the PN for handles and caps for Mojave Sand paint code PTA? Found some charts, but no luck on Mojave.

 

[jdduck1212]

i can’t believe the price has actually doubled since i ordered mine. It is either that good or that in demand. View attachment 47573

Damn you weren't kidding! $200 I wouldn't hesitate, but $400 for some interior lights... I don't know if that's worth it to me.

 

[HydroTRX420]

Damn you weren't kidding! $200 I wouldn't hesitate, but $400 for some interior lights... I don't know if that's worth it to me.

View attachment 47632

Yup i mean i can tell you they were great quality but like others have said in the past are we paying the TRX tax???? Sucks. If it was a changeable multi colored system upgrade then it might be justifiable but single color??? I dunno.

 

[nyinstaller]

I’ve got about 10 sets of rear harnesses out there for people who have successfully added rear passive entry on a variety of 2019-2022 Rams. Including my own 2017 ram.
A new RF hub is not needed.

so are you just tapping on to the front wiring. for example on a 22 ram. ive got the wiring for the handles and handles to test with. i did try tapping onto the front door wiring before and it ended up killing that circuit as it saw both handles. disconnect one and the other would work. gave up/ran out of time for that day. are you running diodes ore anything to prevent the handles from seeing each other. id like to add this to my 22 rex but when I tried back on my 19 it was a fail.

 

[nyinstaller]

Anybody know the PN for handles and caps for Mojave Sand paint code PTA? Found some charts, but no luck on Mojave.

i am on the parts catalog and i do not see that color listed at all. your vin maybe required to pull it up and or a call into system as its not showing the color at all.

 

[Jimmy07]

Anybody know the PN for handles and caps for Mojave Sand paint code PTA? Found some charts, but no luck on Mojave.

Like posted above, I can’t find the PN in any catalogs either.
But, based on all the other part numbers for the handles and caps, I’d say the handle is 6CV64GTAAD, driver side cap is 6CV50GTAAC, and passenger cap is 6CV52GTAAB

 

[jdduck1212]

so are you just tapping on to the front wiring. for example on a 22 ram. ive got the wiring for the handles and handles to test with. i did try tapping onto the front door wiring before and it ended up killing that circuit as it saw both handles. disconnect one and the other would work. gave up/ran out of time for that day. are you running diodes ore anything to prevent the handles from seeing each other. id like to add this to my 22 rex but when I tried back on my 19 it was a fail.

It might be worth watching my install video I threw together on this (earlier in this thread) - it may help shed some light on exactly what needs to be done. But it's been a few weeks now and mine still works perfectly.

 

[Trxgmoney]

Correct. I can set you up with the wiring kit and instructions.

Jimmy07, I fumbled into this forum and wanted to do the same. Can you provide me the same information? I have a 22 TRX!

 

[BadHabit_TRX]

If @Jimmy07 is still making harness, i want a pair as well.

 

[TRX-BR4Z1L]

Hey @Jimmy07 put me on that list as well, thanks

 

[DanZman]

I missed this the last time it came around. I’d love to get in on this.

 

[Jimmy07]

I missed this the last time it came around. I’d love to get in on this.

Send me a PM if you need a set of harnesses.

 

[jvandy]

@Jimmy07 I am interested in this. Send me a PM with a price 22 Black TRX

 

[Jimmy07]

@Jimmy07 I am interested in this. Send me a PM with a price 22 Black TRX

Pm sent.

 

[CoMo_TRX]

@Jimmy07 if you’re still doing the harnesses I’d like to grab a pair. It’s on a 22 white TRX if you have #’s for the handles that’d be awesome too!