What did you do to your TRX today?

[stubs_78]

Installed the WeatherTech sill protectors today. Super easy installation and really good fit.

 

[HDMLNIUM]

Installed a Fitcamx dashcam.
Bill

 

[Ev_nev_R]

Griptec 2.95. Weighs maybe 1/4 of that stock one but isn’t clutched so I did pin the lower to be safe. Flex fuel tune through Dusterhoff (DT937). Perfect TRX setup IMO. It rips when you want it to but drivability is as good as stock and nothing is really stressed too much at this level. Can still tow my boat and do whatever else I want.

What was the total price for that? Parts and labor? Been on the fence but if I had to I think I'll take it to dusterhoff.

 

[Two]

What was the total price for that? Parts and how many beers?

Fixed.

 

[OnTheReel]

What was the total price for that? Parts and labor? Been on the fence but if I had to I think I'll take it to dusterhoff.

Did the install myself in the driveway over a couple weekends so all I have into it is the package price and a few more bucks for the crank pin kit, tools for the blower pulley swap, and spark plugs. Overall it’s not too difficult aside from the piss poor access to a few things/ haphazard engine bay layout. Will do a full write up and my thoughts on the process soon. But in short, I am not a young buck anymore so I was pretty sore and covered in bruises by the end of it. I definitely won’t begrudge anyone for taking it to them to do it instead. They are good people.

 

[Bjammin101]

East Coast Driveline installed and the Cornerstone CAI is back on the truck with a new filter. It did remind me in the 20 min of towing the camper back to storage why I took it off to go to Big Bend haha.

 

[Krewton]

East Coast Driveline installed and the Cornerstone CAI is back on the truck with a new filter. It did remind me in the 20 min of towing the camper back to storage why I took it off to go to Big Bend haha.
View attachment 146842View attachment 146841

If you ever take the Cornerstone intake off again and don’t want it, I’d consider buying it off of you. Losing hope they’ll ever make more.

 

[Krewton]

Slapped on step 1 of making my engine bay look nicer. After seeing @DMR ’s and talking to him, I had to buy a paint matched fuse box cover. Next will eventually be either paint matched or all black battery cover. I still have the nasty fabric wrap. Those 2 covers with a cornerstone intake will clean up a lot of the plastic garbage in the engine bay.

 

[LTCBPL]

Slapped on step 1 of making my engine bay look nicer. After seeing @DMR ’s and talking to him, I had to buy a paint matched fuse box cover. Next will eventually be either paint matched or all black battery cover. I still have the nasty fabric wrap. Those 2 covers with a cornerstone intake will clean up a lot of the plastic garbage in the engine bay. View attachment 146869

Link please

 

[DaCapt]

Got in it with a big smile was doing a cool 90mph watching my gas tank go down and continued smiling that's when I got a P061A code and loss of power... I pulled off on the shoulder on 95north and after restarting and getting back on the road I got a low tire pressure warning and pulled off the next exit to check and sure enough something punctured it but didn't stay in it. So now I am getting it patched.

Is it Monday? What the

 

[DaCapt]

Slapped on step 1 of making my engine bay look nicer. After seeing @DMR ’s and talking to him, I had to buy a paint matched fuse box cover. Next will eventually be either paint matched or all black battery cover. I still have the nasty fabric wrap. Those 2 covers with a cornerstone intake will clean up a lot of the plastic garbage in the engine bay. View attachment 146869

These are cool!

 

[saturnfire]

East Coast Driveline installed and the Cornerstone CAI is back on the truck with a new filter. It did remind me in the 20 min of towing the camper back to storage why I took it off to go to Big Bend haha.
View attachment 146842View attachment 146841

How difficult was the drive shaft install? When I start having the issue I will probably go this route. But at this point only have ~7K miles on the TRX.

 

[Bjammin101]

How difficult was the drive shaft install? When I start having the issue I will probably go this route. But at this point only have ~7K miles on the TRX.

If you are somewhat mechanically inclined, it's not too bad with someone else helping. I had never messed with u-joints but watched a general video online and bought this tool which helped tremendously. Without it, I wouldn't have been able to do it. To be honest, I dont ever plan on messing with it again so if someone wants to buy the tool from me in Houston, let me know!

I highly recommend the East Coast Driveline though and was very high quality.

 

[Krewton]

Link please

2019 and Up Ram 1500 Fuse Box Cover

americanbrotherdesigns.com

 

[FULLTHROTTLERICK]

Installed the WeatherTech sill protectors today. Super easy installation and really good fit.

Are those grippy at all? I've got some old grip tape in that area for helping the kiddos get out but its' kinda fading pretty bad

 

[CallmeDoody]

Are those grippy at all? I've got some old grip tape in that area for helping the kiddos get out but its' kinda fading pretty bad

They are not grippy, just plastic covers.

 

[DMR]

Slapped on step 1 of making my engine bay look nicer. After seeing @DMR ’s and talking to him, I had to buy a paint matched fuse box cover. Next will eventually be either paint matched or all black battery cover. I still have the nasty fabric wrap. Those 2 covers with a cornerstone intake will clean up a lot of the plastic garbage in the engine bay. View attachment 146869

Appreciate the shout out. Looks awesome, nice touch.

 

[FULLTHROTTLERICK]

TRX on 38s + Power Wagon on 38s + Bronco Sasquatch + Ram 1500 on 37s take on Fun Run - the Hardest Jeep Badge of Honor Trail at Hot Springs ORV

 

[Two]

Celebrated 4+ months since having to put gas in it.

 

[IdahoKTM]

Celebrated 4+ months since having to put gas in it.

Not driving your TRX is nothing to celebrate.