BrawlerFab TRX build

[Boosted]

Been a while since I got to fab up something just for fun....

(fun fact: there were 3 different variations of the BrawlerFab Pre-Runner light mount before we started to produce them)

 

[Boosted]

Time to enjoy the truck a bit before tearing into it again.... burning off some steam and in this particular moment, some rubber.

 

[Boosted]

Back to working on the truck.... this time it's the Rogue Offroad level kit to make some room for the 37's.

 

[Boosted]

37's are finally on the truck!

 

[Boosted]

Cleaned up for some pics....

 

[Boosted]

Somewhere along the way I removed the bedside and hood decals (after about a week of having them on) and forgot to mention I installed a JLT catch can on day 2 of having the truck. Minor details but thought I should mention incase someone notices.... lol

 

[Boosted]

Do you still have the welds that you first installed? They look bad ass!

Yes and they are for sale.

 

[916Ghost]

Yes and they are for sale.

I’m still waiting for my truck to be built. What are you asking? Will they rub without a level kit on 35’s

 

[Boosted]

I’m still waiting for my truck to be built. What are you asking? Will they rub without a level kit on 35’s

I had them installed by the dealership during PDI so they were on the truck when I took delivery of it with no level. Slight rub when turning full lock and hitting a bump on the inner liner behind the tire. Nothing a heat gun can’t cure.

Paid $4700 with Mopar sensors and gorilla lug nuts, was asking $3800 without lug nuts but I will let them go for $3500. They have less than 3000 miles on them.

 

[Somefun]

Finally got around to apply the gunmetal grey TRX bedside and hood logos that I had cut while waiting for my truck to arrive.

View attachment 28485

Looks fantastic man! In this photo you only have the lower perch or is this the stock height? I still like the rake with the back a little higher and dont want to mess that up. Would like to match your ride heiget.

 

[Boosted]

Looks fantastic man! In this photo you only have the lower perch or is this the stock height? I still like the rake with the back a little higher and dont want to mess that up. Would like to match your ride heiget.

That’s stock with just wheels and tires.

 

[Somefun]

That’s stock with just wheels and tires.

Wow! I haven’t gotten mine in yet but always looking for good mods. If you add just the lowers and the rear spacer will that look like stock only highe? Would like to keep the rake a bit but raise the whole truck up a little bit.

 

[Boosted]

Wow! I haven’t gotten mine in yet but always looking for good mods. If you add just the lowers and the rear spacer will that look like stock only highe? Would like to keep the rake a bit but raise the whole truck up a little bit.

Yes, that’s pretty much what you will end up with.

 

[CustomPerformance]

I asked them to not "unwrap" the interior because I saw someone else mention that they did the same thing here on the forum. I drove the truck back to the dealership (right across the street) from the gas station to finish up the paperwork and unwrap enough of the interior myself to make the 2hr drive home. Removed the rest after getting home.

*note to self....never ask the dealership to not unwrap interior again! lol

Haha I did the same thing on mine, and after the fact I realized that was stupid of me. Just let them unwrap it next time! When it showed up my wife was like "why didn't you have them unwrap it?" Needless to say, her disapproving tone and look were more than enough to convince me to not do that again!

 

[Boosted]

Haha I did the same thing on mine, and after the fact I realized that was stupid of me. Just let them unwrap it next time! When it showed up my wife was like "why didn't you have them unwrap it?" Needless to say, her disapproving tone and look were more than enough to convince me to not do that again!

I was too embarrassed to let my wife know what I had done…..

 

[CustomPerformance]

Just checking in to see if you had gotten your rear lift option sorted out. I'd like to raise the rear end of my TRX now that I've put on the Rogue leveling kit. The back needs to come up 3/4" to 1".

Merry Christmas!

 

[Boosted]

Just checking in to see if you had gotten your rear lift option sorted out. I'd like to raise the rear end of my TRX now that I've put on the Rogue leveling kit. The back needs to come up 3/4" to 1".

Merry Christmas!

It’s close. Hope to have it wrapped up this week. Merry Christmas to you as well!

 

[Oscmo1638]

Did the Rogue kit stiffen your ride or change the ride quality?

 

[LagoTRX]

Ok, time to try to get this build thread back dated to the beginning and to it's current state....

Ordered 4/24 but didn't get put into the system until 4/26.
VIN a few days later.
BS and WS 4 months later
Arrived at the dealership on 9/9 after spending 4 weeks on a train and a few days at the rail yard.

I had already taken my wheels and tires (Weld Racing 20x10 Ledge 6 with -18 offset and 325/60R20 Nitto Ridge Grapplers) to the dealership to put on the truck during PDI.

View attachment 28478View attachment 28479

before you switched to the 37s how was this set up? Was there any rubbing? Looking to do similar size and offset and stay on 35s sorry if you already answered it

 

[TerrysTRX]

Did the Rogue kit stiffen your ride or change the ride quality?

Not to speak for @Boosted but I asked the same question in another thread and he said it did not change the ride quality.