What did you do to your TRX today?

I was thinking about doing this as well
Yeah, unfortunately I see no way forward with it. At least not using factory parts. If you file the key off the factory charger plug, the 2025+ charge module will plug right in (and the pinout is the same) but they don't talk. And since the 2019-2024 charge modules are much bigger I can’t just fit two of those old ones on the 2025+ mat.
 
My 2023 radio has been working really well. No CarPlay connection issues ever. If you do plan on completing your swap down the road it wouldn’t be a bad idea to grab a 2023 radio anyway. Otherwise I’d try the other obvious things…reset, maybe pull screen and check connection on the radio module for the BT/WiFi antenna. Although it should work even without the antenna. Most people who swap from UC4 don’t connect one.
I've done all the above with my radio. Since new it would never hold a connection for longer than 3 minutes. it would just constantly drop. It will however stay connected with just regular Bluetooth. Just not with Android Auto or Car play with my work phone.

If I can find a radio module at a decently priced I may go for it. Still scared of the dealer for that bcm swap though lol
 
First cool morning this year here in Houston area. Of course it was already 60 degrees when I had a chance to do a pull…My best before was 4.2 on the same little crappy road, all 4 tires chirped pretty hard so I’m fairly certain I can bring this down more
 

Attachments

  • IMG_5794.webp
    IMG_5794.webp
    78.1 KB · Views: 53
  • IMG_5795.webp
    IMG_5795.webp
    80.7 KB · Views: 59
First cool morning this year here in Houston area. Of course it was already 60 degrees when I had a chance to do a pull…My best before was 4.2 on the same little crappy road, all 4 tires chirped pretty hard so I’m fairly certain I can bring this down more
I'm a ~150miles north of Houston and was thinking of doing the same thing this morning. It was 32f here at 7am but I was just too lazy to get up and get out in the cold. :) I'll wait until it stays cold later in the day. Won't be long.
 
Tidied up my horn re-locate and re-wrapped the harness in tesa 51036 for that 'factory' look. Decided to change my OEM horns too so picked up PIAA superior bass horns and some pigtails to avoid cutting into the OEM harness and connectors.
Ok update on this. I didn't like the PIAA horns, barely any difference from the OEM ones!
 
Installed the JMB intake and SRT Autoworks catch can. Pretty easy install. Went with t-bolt clamps on the JMB and worm clamps on the catch can. Probably not needed but I’m OCD and like stuff secure. Whine is insane but addictive. I love it.
IMG_1338.webp
IMG_1334.webp
IMG_1336.webp
 
Installed the JMB intake and SRT Autoworks catch can. Pretty easy install. Went with t-bolt clamps on the JMB and worm clamps on the catch can. Probably not needed but I’m OCD and like stuff secure. Whine is insane but addictive. I love it.
View attachment 137137View attachment 137138View attachment 137139
Does anybody have a guess what the torque spec would be on the engine block bolt for the mount on the JMB? Was gonna use a dab of threadlocker but didn't know the spec.
 

TRX Forum Favs 👍

Back
Top