What did you do to your TRX today?

[CustomPerformance]

Working on installing the 50" Rigid Adapt light bar.

How are you mounting that?

 

[CustomPerformance]

Obligatory petro run, at least it is not $5 a gallon yet. I think it cost me $10 just to go the the fueling station and back. (Smiles per gallon, smiles per gallon, smiles per gallon)

Ouch! Sucks when you only get about half a tank of gas for $100!

 

[SRT Honey Badger]

Well, I didn’t do anything to it today……buuuuuut I am getting a divorce primarily because I bought my TRX. Long story short, I was looking at trucks so I could tow my Canam Maverick X3 because my Jeep wasn’t cutting it. I showed her pics of a TRX and she said, “holy shit that’s a no brainer, you’re a car guy. That truck is you!” She hesitated a bit when she saw the price, but the wheels were already in motion in my mind. So I sold my Jeep and some stocks and paid cash for the beast. Now we’ve been having problems and sure as shit, the truck conversation keeps popping up. I told her I don’t give a shit, I fucking love that truck! So…..peace out The TRX is staying.

 

[tblountman]

Well, I didn’t do anything to it today……buuuuuut I am getting a divorce primarily because I bought my TRX. Long story short, I was looking at trucks so I could tow my Canam Maverick X3 because my Jeep wasn’t cutting it. I showed her pics of a TRX and she said, “holy shit that’s a no brainer, you’re a car guy. That truck is you!” She hesitated a bit when she saw the price, but the wheels were already in motion in my mind. So I sold my Jeep and some stocks and paid cash for the beast. Now we’ve been having problems and sure as shit, the truck conversation keeps popping up. I told her I don’t give a shit, I fucking love that truck! So…..peace out The TRX is staying.

Side note.....how you liking the Canam?...I've been looking at maybe doing one of those...

 

[SRT Honey Badger]

Side note.....how you liking the Canam?...I've been looking at maybe doing one of those...

Love it! Turbo 5 seater.

 

[tblountman]

Love it! Turbo 5 seater.

Nice ride....exactly what I'm looking at...thank you.

 

[Chugger28]

No, bought them on eBay and painted them red.

Hey Honey Badger, Did you also get the Supercharger badge by the rear door on eBay as well? I love it! What did you search for? TRX Badges?

 

[nickinfleet]

Love it! Turbo 5 seater.

What trailer do you use for your Can-am? The research rabbit hole on trailers is too much haha.

 

[R3G]

Just dropped off the TRX to get frontal PPF and full ceramic treatment. Gonna be a rough few days without it. To mitigate the sadness I’m ordering accessories for it. Rokblokz (original) mud flaps, mopar license plate cover and looking at retractable bed covers now.

 

[Chugger28]

Hey R3G, I am trying to decide between the Roll and Lock Retractably Bed covers or the Retrax pro Bed Cover. I like the way that the Roll and Lock look with the raised end that meets the rear of the cab and the additional light inside the bed but I don't believe that the Roll and Lock has the slots running along the length of the truck bed where you can add a Rack system. I hear Prince Edwards also makes a good retractable? Let me know what you decide and why?

Getting my Ceramic coating in September! Can you tell me what company you went with? or what Product of Ceramic coating that they are using?

I was deciding between FeynLab Self Healing Ceramic Coating, Gyeon or Xpel Fusion. All three require a professional installer. I was trying to research what the better product was but from what I hear the installer is more important then the product? Let me know what you went with? Thanks

 

[R3G]

This is the place I'm getting the work done. Clear Bra North Dallas, Xpel clear ppf and then Feynlab ceramic coating over whole truck.

 

[R3G]

Hey R3G, I am trying to decide between the Roll and Lock Retractably Bed covers or the Retrax pro Bed Cover. I like the way that the Roll and Lock look with the raised end that meets the rear of the cab and the additional light inside the bed but I don't believe that the Roll and Lock has the slots running along the length of the truck bed where you can add a Rack system. I hear Prince Edwards also makes a good retractable? Let me know what you decide and why?

Getting my Ceramic coating in September! Can you tell me what company you went with? or what Product of Ceramic coating that they are using?

I was deciding between FeynLab Self Healing Ceramic Coating, Gyeon or Xpel Fusion. All three require a professional installer. I was trying to research what the better product was but from what I hear the installer is more important then the product? Let me know what you went with? Thanks

https://rollnlock.com/images/ePIM/original/RNLRC401E-RC402E.pdf

Yeah I was looking at the E-Series Retractable Truck Bed Cover, the install guide looks to be compatible with the utility rails (I definitely want to keep those on the bed) but it doesn't say specifically it fits the TRX trim.

 

[hellcat07]

I went with the Roll-N-Lock because I wanted the Cargo Manager. Got the E-Series (powered) and love it.

 

[hellcat07]

https://rollnlock.com/images/ePIM/original/RNLRC401E-RC402E.pdf

Yeah I was looking at the E-Series Retractable Truck Bed Cover, the install guide looks to be compatible with the utility rails (I definitely want to keep those on the bed) but it doesn't say specifically it fits the TRX trim.

The E-Series does fit the TRX with the Utility Rails, see my post just now above.

 

[LSUFan69]

i 100% stand behind these upgrades but I am shocked on the lack of tuning available. DiabloSport is still working on a tune for the TRX and they are the defacto tuning company behind our engines for 15 years. I am sorry I am not more supportive or stoked for you, I just dont know who is doing the tuning which will make or break your experience. If it ain't diablosport, they dont know what they are doing.

Nick, if you check out the demon forums Bailys hyperformance is the real deal for Mopar tuning

 

[Chugger28]

I went with the Roll-N-Lock because I wanted the Cargo Manager. Got the E-Series (powered) and love it.

View attachment 18627View attachment 18626

Hey helcat07, Is that cargo manager compatible with the Cover or the Utility Rails that came with the TRX? Does it connect to the Utility rails?

 

[hellcat07]

Hey helcat07, Is that cargo manager compatible with the Cover or the Utility Rails that came with the TRX? Does it connect to the Utility rails?

It has its own rails that attach to the Roll-n-lock rails. They mount above the utility rails. Mopar sales the same cargo manager rebranded Mopar. But come with rails too. Would have been much better if it used the Utility rails.

 

[Guns22]

Exhaust , SLP loudmouth, sounds amazing and incognito lower pulley , between the better roar and extra pull from pulley best mods so far for me anyway .

 

[R3G]

Hey R3G, I am trying to decide between the Roll and Lock Retractably Bed covers or the Retrax pro Bed Cover. I like the way that the Roll and Lock look with the raised end that meets the rear of the cab and the additional light inside the bed but I don't believe that the Roll and Lock has the slots running along the length of the truck bed where you can add a Rack system. I hear Prince Edwards also makes a good retractable? Let me know what you decide and why?

Getting my Ceramic coating in September! Can you tell me what company you went with? or what Product of Ceramic coating that they are using?

I was deciding between FeynLab Self Healing Ceramic Coating, Gyeon or Xpel Fusion. All three require a professional installer. I was trying to research what the better product was but from what I hear the installer is more important then the product? Let me know what you went with? Thanks

I am leaning towards Retrax over Roll and Lock due to the T-Rails not sure how much I’ll use them but definitely like the idea of the accessory mount capability.

 

[Raptor429]

Today I tried to adjust the stupid uneven exhaust tips. Blows my mind that they came from the factory all wonky. I adjusted them as much as possible, but the right is still protrudes out about 3/4" more than the left.

Also installed a billet catch can.