Start Button Kill Switch Harness

[Me badd]

Is anyone interested in a harness to wire in a kill switch for the start button? I did not want to cut factory wiring so I made a harness with factory plugs and 2 wires that will lead to a kill switch. $25 shipped. View attachment 57316

Hi Paul
Mike here from Texas
Yes I want another one please. I love it! Works perfect. No hurry I want get my 23 until June or July . Thanks I think my wife still has your account so I will send you the 25$

 

[maestro5531]

I’m assuming this will work for the Trackhawk as well? If that’s the case, I’ll take two please.

I just confirmed that it does work on WK2 Jeeps as well. In my case its a 2017 Grand Cherokee.

Below is the info on how to pull it apart on the Grand Cherokee.

1. Pull the trim behind the steering wheel. 2 clips on left and right, 1 clip on the bottom.
2. Pull the radio/climate trim. Its secured with clips. I started on the driver side, just above the ash tray area.
3. Start button/trim is secured with 2 screws(I used 9/32nds, whatever it is in metric) and 3 clips.
4. Reinstall in reverse order.

 

[maestro5531]

Hi Paul
Mike here from Texas
Yes I want another one please. I love it! Works perfect. No hurry I want get my 23 until June or July . Thanks I think my wife still has your account so I will send you the 25$

Thanks, Let me know if you need the info.

 

[WhiskeyOne]

I just confirmed that it does work on WK2 Jeeps as well. In my case its a 2017 Grand Cherokee.

Below is the info on how to pull it apart on the Grand Cherokee.

1. Pull the trim behind the steering wheel. 2 clips on left and right, 1 clip on the bottom.
2. Pull the radio/climate trim. Its secured with clips. I started on the driver side, just above the ash tray area.
3. Start button/trim is secured with 2 screws(I used 9/32nds, whatever it is in metric) and 3 clips.
4. Reinstall in reverse order.

That’s great. Thank you!

Send me a PM for two please.. one TRX and one WK2.

 

[VoltesV]

@maestro5531 I'd love one also; please add me to your list. THANK YOU!!

 

[Me badd]

Thanks, Let me know if you need the info.

Yes sir thank you Paul

 

[TRXGUYINMS]

Interested in one as well

 

[RamTrxUSA]

@maestro5531 I’ll like to purchase one as well for my trx.

 

[Moabtj]

I have on order a 2023 Jeep wrangler 392 will it work on it?

 

[Claasicdrive]

I have on order a 2023 Jeep wrangler 392 will it work on it?

Yes

 

[Alfonzo409]

Thanks, Let me know if you need the info.

Hello, are you still selling the wiring harnesses?
Thank you

 

[maestro5531]

Hello, are you still selling the wiring harnesses?
Thank you

Yes I am but I am out of town until Wednesday due to family emergency. I have 12 harnesses left at home but they are all paid for. I will be ordering more parts this week and depending if they come in before the weekend, I might not be able to ship them until 3/18. I can PM you once I have everything here.

 

[Alfonzo409]

Thank you for the quick response! I am interested but may get it done before you have time to get parts and make more. Let me know when you have and I may get one or 2 from you.
Hope everything is ok with your emergency situation!

 

[quikag]

Got mine hooked up a few weeks ago. Works perfect. Thank you, Maestro!!

 

[cowboybob]

@maestro5531 I’d like to order one for my ‘22 TRX please. Hope that everything is well with your family.
thanks

 

[Air’d outSRT]

I just confirmed that it does work on WK2 Jeeps as well. In my case its a 2017 Grand Cherokee.

Below is the info on how to pull it apart on the Grand Cherokee.

1. Pull the trim behind the steering wheel. 2 clips on left and right, 1 clip on the bottom.
2. Pull the radio/climate trim. Its secured with clips. I started on the driver side, just above the ash tray area.
3. Start button/trim is secured with 2 screws(I used 9/32nds, whatever it is in metric) and 3 clips.
4. Reinstall in reverse order.

They all use the same cdp1 and the push button is part of the install

 

[coruptr]

@maestro5531 I'll take one as well.

 

[93ls1rx7TRX]

Yes I am but I am out of town until Wednesday due to family emergency. I have 12 harnesses left at home but they are all paid for. I will be ordering more parts this week and depending if they come in before the weekend, I might not be able to ship them until 3/18. I can PM you once I have everything here.

I would love to get one too. A wait for a few weeks is ok with me.

 

[maestro5531]

@maestro5531 I'll take one as well.

I would love to get one too. A wait for a few weeks is ok with me.

If my supplier gets me parts on Wednesday, I might be able to ship this Saturday. I will send you PM once I have everything ready. Thanks

 

[Rico392]

Hey man, I want in! Whenever you make the next batch if possible. Hope all is well with family, that's the most important thing.