What Do You Want For Your TRX?

[Because I Was Inverted]

2) Brackets to mount an air compressor to, either for on-board air, or in my application, charge a train horn. Again there are ones available on the market, but every one I have seen so far either has to mount in the bed, or you have to lose your spare tire and mount it there. Don't really want to lose my spare, although that solution is elegant. Mounting it in the bed isn't a horrible idea, but, you lose bed space, might damage the compressor from something unsecured in the bed, and in some states those horns are not completely legal so you don't want them observable by casual inspection from your friendly neighborhood police officer. (o:

Maybe you haven't seen this:

HOT! - Very first production BrawlerFab Battery Box

Here it is! The very first production BrawlerFab Battery Box! We are in full swing getting these assembled and will have them sent to powder coat this week. This particular one will be going to @TReX-RAM who was the thorn in my side to get these done! :p Thank you my friend, I think they...

www.ram-trx.com

 

[Mymcodebee]

I would like my key!!

 

[PhoenixTRX]

How about a RAM-TRX (AZ owner) meet at your shop (or if logistically better, restaurant (side room). We have commercial shopping plazas (N. Phoenix/Scottsdale/Glendale (<- Westgate Plaza) and could help coordinate with a tenant.

I'm up for buying a T-shirt/other branding support, honestly it's refreshing to be sought for input and ideas.

The last time was Matt (Builtright Industries) I first made contact when he did the F150 rear seat back release... amazing the organic/steady/well-planned growth and products today (along with an excellent reputation). You're doing it right!

 

[DanZman]

How about a RAM-TRX (AZ owner) meet at your shop (or if logistically better, restaurant (side room). We have commercial shopping plazas (N. Phoenix/Scottsdale/Glendale (<- Westgate Plaza) and could help coordinate with a tenant.

I'm up for buying a T-shirt/other branding support, honestly it's refreshing to be sought for input and ideas.

The last time was Matt (Builtright Industries) I first made contact when he did the F150 rear seat back release... amazing the organic/steady/well-planned growth and products today (along with an excellent reputation). You're doing it right!

I didn’t realize that S&G was local. I’d love to have a group meet. Being part of a community is one of the best parts of car culture.

Seriously though… east valley is better

 

[PhoenixTRX]

I didn’t realize that S&G was local. I’d love to have a group meet. Being part of a community is one of the best parts of car culture.

Seriously though… east valley is better

Shifts' we are ready when you are!

Could be a fun brainstorming meet-up and long overdue regardless!

 

[Shifts_And_Grins]

They’re just in such a bad place. Too easy to screw up if you smash your bumper. Then you have to go and buy a $50 plastic bracket (predictably on back order somehow) and figure out which exact new bolts you need.

View attachment 42578

Those look like super specialty bolts!

 

[Shifts_And_Grins]

I didn’t realize that S&G was local. I’d love to have a group meet. Being part of a community is one of the best parts of car culture.

Seriously though… east valley is better

We are in Southeast Gilbert. We need to start getting some meetups setup. It would force me to take part of a day off now and then. lol

 

[Shifts_And_Grins]

How about a RAM-TRX (AZ owner) meet at your shop (or if logistically better, restaurant (side room). We have commercial shopping plazas (N. Phoenix/Scottsdale/Glendale (<- Westgate Plaza) and could help coordinate with a tenant.

I'm up for buying a T-shirt/other branding support, honestly it's refreshing to be sought for input and ideas.

The last time was Matt (Builtright Industries) I first made contact when he did the F150 rear seat back release... amazing the organic/steady/well-planned growth and products today (along with an excellent reputation). You're doing it right!

Thank you very much. I'd love to do a meet. It would be a ton of fun to do a short close run and then meet at a restaurant afterwards. We met a Rebel group in Vegas last year and made lifelong friends. For that meet, we met at a restaurant for a little parking lot jam, did a cruise down the strip and then went on an easy run in the desert. After we went to a restaurant and had dinner and a good time. It was very inclusive for the people that didn't want to go off road to still participate before and after the run. It would be great to do something like that.

 

[Shifts_And_Grins]

How about a RAM-TRX (AZ owner) meet at your shop (or if logistically better, restaurant (side room). We have commercial shopping plazas (N. Phoenix/Scottsdale/Glendale (<- Westgate Plaza) and could help coordinate with a tenant.

I'm up for buying a T-shirt/other branding support, honestly it's refreshing to be sought for input and ideas.

The last time was Matt (Builtright Industries) I first made contact when he did the F150 rear seat back release... amazing the organic/steady/well-planned growth and products today (along with an excellent reputation). You're doing it right!

As far as seeking the end user for input and ideas, that just makes sense to me. I'm a small fraction of the end users of my products. I am all about changing things we release too. Our light bar brackets to mount the 30" light bar behind the lower bumper grill (we finally get to test them on a TRX) have had 3 minor design changes/improvements based on customer feedback. It just makes sense to listen to the customers and do our best to make something they love and is functional for them. I get such a thrill from seeing people post their trucks and brag about their upgrades using our products. I love it. Lots of great ideas everyone. Keep them coming!

 

[WVU_Eric]

I'd love more bed organization options. I have the bed utility group that only has 4 tie downs. I would like to see bed dividers, storage compartments, maybe a temp spare tire bracket. All stuff that uses the underused rails.

I would like a storage tray that goes across the bed, a few inches deep, maybe 2 feet front to back and the width of the bed and is suspended from those tie down rails. This would give you a place to put smaller items while leaving the full bed below for larger items. Make a lid optional, so if you didn't have a tonneau cover you could secure the items in it.

You could use it for ratchet straps and shit like that or when tailgating you could put beers and ice in it. Doesn't need to be insulated, just water tight and possible have a drain plug.

 

[wac45]

I'd love more bed organization options. I have the bed utility group that only has 4 tie downs. I would like to see bed dividers, storage compartments, maybe a temp spare tire bracket. All stuff that uses the underused rails.

I would like a storage tray that goes across the bed, a few inches deep, maybe 2 feet front to back and the width of the bed and is suspended from those tie down rails. This would give you a place to put smaller items while leaving the full bed below for larger items. Make a lid optional, so if you didn't have a tonneau cover you could secure the items in it.

You could use it for ratchet straps and shit like that or when tailgating you could put beers and ice in it. Doesn't need to be insulated, just water tight and possible have a drain plug.

I have been looking for a nice bed divider. The Mopar one will not fit with my armor flex bed cover, plus it seems overly complex for what it does. Actually the Ford bed divider on my Raptor was very nice and fit with my bedcover.

 

[DanZman]

I'd love more bed organization options. I have the bed utility group that only has 4 tie downs. I would like to see bed dividers, storage compartments, maybe a temp spare tire bracket. All stuff that uses the underused rails.

I would like a storage tray that goes across the bed, a few inches deep, maybe 2 feet front to back and the width of the bed and is suspended from those tie down rails. This would give you a place to put smaller items while leaving the full bed below for larger items. Make a lid optional, so if you didn't have a tonneau cover you could secure the items in it.

You could use it for ratchet straps and shit like that or when tailgating you could put beers and ice in it. Doesn't need to be insulated, just water tight and possible have a drain plug.

Not to take away business from S&G. But no need to reinvent the wheel on some things.

You may want to check this out. It looks to be well made. Just a bit expensive and I question how water tight they will really be.

Products to suit Ram Trucks

Tailgate Storage for a range of pickups and wagons

hfabusa.com

 

[Shifts_And_Grins]

Not to take away business from S&G. But no need to reinvent the wheel on some things.

You may want to check this out. It looks to be well made. Just a bit expensive and I question how water tight they will really be.

Products to suit Ram Trucks

Tailgate Storage for a range of pickups and wagons

hfabusa.com

I am plenty busy enough that I don't need to reinvent the wheel so contrary to some businesses I appreciate you pointing that out. There have been tons of great ideas and I appreciate all of the input and dialog. That is exactly why I started this thread. Keep them coming and keep the dialog going. I love it. We want to make cool stuff that you guys want.

 

[Shifts_And_Grins]

Not to take away business from S&G. But no need to reinvent the wheel on some things.

You may want to check this out. It looks to be well made. Just a bit expensive and I question how water tight they will really be.

Products to suit Ram Trucks

Tailgate Storage for a range of pickups and wagons

hfabusa.com

To be clear though, I don't mind making something that is already out there if I feel I have something to offer to improve the product.

 

[Levilucas2005]

Biggest thing I want for my TRX is for it to get built and then ship to my house

 

[Shifts_And_Grins]

Biggest thing I want for my TRX is for it to get built and then ship to my house

I was in the same boat until Thursday when my day finally came. Now I need to get all of my work done so I can install my ditch lights and reverse lights. Then I will start designing and building new stuff.

 

[naamanf]

I have been looking for a nice bed divider. The Mopar one will not fit with my armor flex bed cover, plus it seems overly complex for what it does. Actually the Ford bed divider on my Raptor was very nice and fit with my bedcover.

I really like the fold up one on my Raptor. I'm going to see if it's possible to use it on the TRX when it comes in.

 

[PhoenixTRX]

Thank you very much. I'd love to do a meet. It would be a ton of fun to do a short close run and then meet at a restaurant afterwards. We met a Rebel group in Vegas last year and made lifelong friends. For that meet, we met at a restaurant for a little parking lot jam, did a cruise down the strip and then went on an easy run in the desert. After we went to a restaurant and had dinner and a good time. It was very inclusive for the people that didn't want to go off road to still participate before and after the run. It would be great to do something like that.

Sending PM.

 

[Steiger]

Not to take away business from S&G. But no need to reinvent the wheel on some things.

You may want to check this out. It looks to be well made. Just a bit expensive and I question how water tight they will really be.

Products to suit Ram Trucks

Tailgate Storage for a range of pickups and wagons

hfabusa.com

That looks interesting

 

[Daniel J]

Ranch Hand is what the police here in CO run on their SUVs.
I had one on my 2500 Suburban. During 2020 and 2021, it came in handy for pushing street blocking protesters out of the way!

Don't think they have one that works on the TRX?