What did you do to your TRX today?

[FreedomFire]

For you guys with Geisers, how do you like them compared to stock?

So far I like mine, stiffens it up the right amount but not too stiff. Speed bumps feel a little harsh but they still need to settle a bit. Also I need the ride height calibration done. Had a miserable failed experience at the dealership today trying to get them recalibrated. Totally incompetent service department.

 

[@JC]

https://www.ram-trx.com/threads/high-end-seating-upgrade….9610/

I even called my local dealership and had them check the nationwide inventory, no dealership in the country has the passenger side surround. Backorder ETA 3/31...

 

[OnTheReel]

I even called my local dealership and had them check the nationwide inventory, no dealership in the country has the passenger side surround. Backorder ETA 3/31...

I bet Ram is really wondering why the hell so many of these pieces of plastic are being ordered.

 

[LDN]

So far I like mine, stiffens it up the right amount but not too stiff. Speed bumps feel a little harsh but they still need to settle a bit. Also I need the ride height calibration done. Had a miserable failed experience at the dealership today trying to get them recalibrated. Totally incompetent service department.

Have you got an error on screen?

 

[FreedomFire]

Have you got an error on screen?

Only hitting speed bumps I get the service active dampening system message but it goes away when I cycle the ignition.

 

[Engine45]

Did the death stars first oil change. Installed fumoto drain valves and afe dry panel air filters. Gunna hit 1300 miles soon. Peace of mind. I’ll dump this oil at 4000. The oil filter was a…… mofo. Wtf mopar why so gorilla tight guys n gals and others.

 

[RedBeard]

Did the death stars first oil change. Installed fumoto drain valves and afe dry panel air filters. Gunna hit 1300 miles soon. Peace of mind. I’ll dump this oil at 4000. The oil filter was a…… mofo. Wtf mopar why so gorilla tight guys n gals and others.

This may not be the right place to respond but how do you guys like those fumoto drain valves?

 

[Wwin]

Went to the dealership and pulled out my kid seat and other personal possessions because my 22 Sandblast is currently a brick due to the fuel injection system going tango uniform.

 

[LDN]

Went to the dealership and pulled out my kid seat and other personal possessions because my 22 Sandblast is currently a brick due to the fuel injection system going tango uniform.

Hope you get it sorted soon!

 

[Chirp08]

Only hitting speed bumps I get the service active dampening system message but it goes away when I cycle the ignition.

I wonder if alfaobd has the procedure yet. I'm getting the error too and from what I read it's a simple calibration process that should be doable at home.

 

[jashearer]

This may not be the right place to respond but how do you guys like those fumoto drain valves?

I've run them on my last 2 diesels and now the TRX, love them...

Its so nice to hook a drain hose up and then flip the lever and no mess

Jay

 

[Superbrowndude]

 

[Engine45]

This may not be the right place to respond but how do you guys like those fumoto drain valves?

I’ve had several vehicles with fumoto valves. Never any issues with them ever. And no messy oil changes are a big win.

 

[ORCowboy]

I wonder if alfaobd has the procedure yet. I'm getting the error too and from what I read it's a simple calibration process that should be doable at home.

That was a nice thing on my Raptor. Was a quick do it yourself reset at home for the Fox shocks. Would be nice if alfaobd or Tazor would add this feature.

 

[ORCowboy]

So far I like mine, stiffens it up the right amount but not too stiff. Speed bumps feel a little harsh but they still need to settle a bit. Also I need the ride height calibration done. Had a miserable failed experience at the dealership today trying to get them recalibrated. Totally incompetent service department.

Thanks. When you say speed bumps are harsh, is that just a stiffer feel at low speed (less float) or is there a harsh clunk? That was an issue for some on the Raptors but I have heard the TRX Geisers are really dialed in for the weight of the vehicle. Also, any issues with parking sensors post lift? Thanks again for the feedback. I’m getting ready to pull the trigger on these.

 

[Jdeezy32]

Went to the dealership and pulled out my kid seat and other personal possessions because my 22 Sandblast is currently a brick due to the fuel injection system going tango uniform.

check the fuse box... common issue

 

[FreedomFire]

Thanks. When you say speed bumps are harsh, is that just a stiffer feel at low speed (less float) or is there a harsh clunk? That was an issue for some on the Raptors but I have heard the TRX Geisers are really dialed in for the weight of the vehicle. Also, any issues with parking sensors post lift? Thanks again for the feedback. I’m getting ready to pull the trigger on these.

It feels better than when I had them on my Raptor. I think it’s on the down stroke coming off of the speed bump that it feels harsh. Kind of like a clunk. But again no where near as bad as on my Gen 2 Raptor with geisers. Also this is the experience I have hitting them at like 30mph. When it’s set to Baja mode it feels better. When it’s in normal street mode it triggers the “Service Active Dampening System” warning. Still need to have the ride height calibration done.

 

[missinglink]

Installed the Brawler fab behind the grill Rigid 360 light kit and a Go Rhino 2.0 sport rack last weekend. Any suggestions for lights on the sport Rack.? I like all the other M&R stuff I have on the truck, and I see they have a 7-light kit for the ram bar, but I really like the build quality of the rigid 360's I just installed behind the grill.

 

[LDN]

Installed the Brawler fab behind the grill Rigid 360 light kit and a Go Rhino 2.0 sport rack last weekend. Any suggestions for lights on the sport Rack.? I like all the other M&R stuff I have on the truck, and I see they have a 7-light kit for the ram bar, but I really like the build quality of the rigid 360's I just installed behind the grill. View attachment 84552View attachment 84553View attachment 84554

That looks awesome! What lug nuts do you have?

 

[missinglink]

Thanks. I used these Gorilla Lugs
Gorilla Automotive 96644BDX Black Factory Style Wheel Lock System (14mm x 1.50 Thread Size, 24-Pack)