What did you do to your TRX today?

Installed an srt auto works catch can. Had the billet technology dual catch set up but wanted to try this. Like the look, almost looks factory and clean. Like to have options.
 

Attachments

  • IMG_2060.webp
    IMG_2060.webp
    201.5 KB · Views: 109
  • IMG_2059.webp
    IMG_2059.webp
    169.9 KB · Views: 112
  • IMG_0399.webp
    IMG_0399.webp
    234.1 KB · Views: 104
Installed an srt auto works catch can. Had the billet technology dual catch set up but wanted to try this. Like the look, almost looks factory and clean. Like to have options.
What's the SRT piece on the front of the snout or TB? Looks great!
 
What's the SRT piece on the front of the snout or TB? Looks great!
It’s American brothers throttle body cover. Link below. Couple different logo options, just make sure you get the hellcat orientation in the drop down.

 

Attachments

  • IMG_8673.webp
    IMG_8673.webp
    70.2 KB · Views: 64
Published the last trail from our Colorado Overlanding Adventure! A rogue sheep destroys our 38” Mud Terrain!

 
Did the 'missing' ambient light upgrade in the rear doors of my '22. I pulled back the bottom left driver's side rear door panel enough to see the wiring harness part number tag a few weeks ago, and I had the new revision 403AE. My truck has an August 2022 build date so pretty late in the MY. I ordered up a pair of the 402AD wiring harnesses (and the lights), though I had to confirm with the parts vendor that "Doesn't match your VIN - ARE YOU SURE?!?!?". I will say that the wiring harnesses are identical in every way except the older 'D' version has the extra branch by the part tag for the missing light. It even had all the pop in zip tie holders, so it was super easy. I would thank the person with the pro tip on this forum who suggested getting some extra white/yellow retainer clips for the door panel - I didn't break one, but one was missing on the drivers side so I was able pop it in. About an hour each door, no rush.
Door Harness.webp
 
Did the 'missing' ambient light upgrade in the rear doors of my '22. I pulled back the bottom left driver's side rear door panel enough to see the wiring harness part number tag a few weeks ago, and I had the new revision 403AE. My truck has an August 2022 build date so pretty late in the MY. I ordered up a pair of the 402AD wiring harnesses (and the lights), though I had to confirm with the parts vendor that "Doesn't match your VIN - ARE YOU SURE?!?!?". I will say that the wiring harnesses are identical in every way except the older 'D' version has the extra branch by the part tag for the missing light. It even had all the pop in zip tie holders, so it was super easy. I would thank the person with the pro tip on this forum who suggested getting some extra white/yellow retainer clips for the door panel - I didn't break one, but one was missing on the drivers side so I was able pop it in. About an hour each door, no rush.
View attachment 137830
You can reuse one of the harnesses that you removed to add the 2 missing dash lights. plug and play for the most part
 
You can reuse one of the harnesses that you removed to add the 2 missing dash lights. plug and play for the most part

Thanks - good to know. My truck has those dash lights, so I'm all set. I actually had to go check, ha.
 
trx got impounded for 30 days by judge cause cop tried to pull me over but i hit the blackout switch and hit the gas and got away but helicopter got me
Real news or fake news? Feel like that's not something you'd share if there was pending courtroom appearances.
 
Dealer replaced the driveshaft and front sway bar bushing...
 
Hauled some trash away to the dumpster at my job 😂. Seriously...I removed the factory spare tire carrier in the bed. Now I gotta do some bedliner work and hopefully sell the spare tire carrier.
 

TRX Forum Favs 👍

Back
Top