Spark Plugs

Welp, I gave up trying to torque the spark plugs that are next to the firewall on the driver side.
That side sucks, if anyone has tips drop them here for the next guy 🤙🏽

image.webp
 
Welp, I gave up trying to torque the spark plugs that are next to the firewall on the driver side.
That side sucks, if anyone has tips drop them here for the next guy 🤙🏽

View attachment 157222
Just do like ford does with the powerstroke and remove the cab for ease of access
 
Right ? Or just pull the engine

I tightened them by hand then used a ratchet to snug them
I know that driver side was frustrating when I installed my headers. Of course if I had a 2 post lift, it would've been much easier.
Not sure if it would help with doing the plugs, i haven't changed mine yet, but when doing the headers, I removed the steering shaft and it gave me more room to work with and get my arms up in the engine bay through the wheel well
 
I know that driver side was frustrating when I installed my headers. Of course if I had a 2 post lift, it would've been much easier.
Not sure if it would help with doing the plugs, i haven't changed mine yet, but when doing the headers, I removed the steering shaft and it gave me more room to work with and get my arms up in the engine bay through the wheel well
Thought about removing the steering shaft too, I didn’t really mess with it though
 
Thought about removing the steering shaft too, I didn’t really mess with it though
Could be the secret to getting to the rear plugs easier. I will try it or atleast look at it closer when I do my plugs here in a few weeks
 
Could be the secret to getting to the rear plugs easier. I will try it or atleast look at it closer when I do my plugs here in a few weeks
Yeah let me know bro, I will see what happens when I fire this up 😂
 
How many hours does a shop charge for to do plugs?
 
Welp, I gave up trying to torque the spark plugs that are next to the firewall on the driver side.
That side sucks, if anyone has tips drop them here for the next guy 🤙🏽
I used a regular deep socket 1/2 drive (my spark plug socket kept sticking to the plug). Stubby 1/2 extension with a 1/2 to 3/8 adapter so it was just barely clearing the valve cover, and was able to throw my swivel-head 3/8 drive tq wrench on without a problem. Had to feed the socket by itself, then the extension by itself, then attach the ratchet etc. - unsure if there's another way that works, but that's how I did cyl's 5 & 7.
 
How many hours does a shop charge for to do plugs?
Wild guess, but probably in the $500-1000+ range depending on the shop vs dealership. Tbh, if you have tools and some brainpower, the job is definitely doable yourself. NGK's from HHP ran me $167.77 for the set, and a little over 3 hours total. Was my first time doing plugs on a TRX too. Probably spent 2 hours on the driver side alone haha. Passenger side was cake in comparison. I did both sides via the wheel well.
 
Wild guess, but probably in the $500-1000+ range depending on the shop vs dealership. Tbh, if you have tools and some brainpower, the job is definitely doable yourself. NGK's from HHP ran me $167.77 for the set, and a little over 3 hours total. Was my first time doing plugs on a TRX too. Probably spent 2 hours on the driver side alone haha. Passenger side was cake in comparison. I did both sides via the wheel well.
I will try to figure it out the torque situation next time, thanks for the feedback man
 
Thanks for the tips guys. Noticed a little hesitation in mine at 44k miles. I’ll be doing this soon. I’ll start with the driver’s side, then the rest will seem easy.
 
Mine looked fine at ~26k thanks in part to good fuel. Probably wouldn’t have bothered if I wasn’t tuning and doing other things at the time.
IMG_1542.webp

Either way it’s definitely an “empty the toolbox” job. I think I used just about every different length of extension made, and two different torque wrenches to finish the job.
 
If you use a 1/4 ratchet it makes it much easier to get to all the plugs. And I never torque mine, I just add some nickel anti-seize to the threads and snug them down good and tight. Never had an issue with any of my vehicles doing it that way.
Looks like hand tight then some extra turns seems about right for the DIY.
I did it without torque and they haven’t blown up yet 👍🏼
 
Welp, I gave up trying to torque the spark plugs that are next to the firewall on the driver side.
That side sucks, if anyone has tips drop them here for the next guy 🤙🏽

View attachment 157222
just did my plugs last night. Somehow i was able to get a torque wrench on every plug and every coil pack bolt. Will post some tips and the tools used in here later
 

TRX Forum Favs 👍

Back
Top