All the research and still ended up nose high.. back to the drawing board on a smaller leveling kit and trimming.

[Tyeebo]

 

[TReX-RAM]

Add a winch…problem solved?

 

[916Ghost]

What level did you go with?

 

[Tyeebo]

Add a winch…problem solved?

Now you’re thinking

 

[Tyeebo]

What level did you go with?

Foutz Motorsports. I bought the 2 inch in front and the three-quarter rear. I also bought a 1 1/2 inch front and was told the 2” should be fine. It’s an inch higher in the front.

 

[916Ghost]

Foutz Motorsports. I bought the 2 inch in front and the three-quarter rear. I also bought a 1 1/2 inch front and was told the 2” should be fine. It’s an inch higher in the front.

I have the eibach level springs and at first it was a lil bit higher but after a couple days it settled and looks perfect

 

[JUGRNAT22]

View attachment 92248

I dig the light bar with all the old skool Rounds lights

 

[Tyeebo]

What level did you go with?

Foutz Motorsports. I bought the 2 inch in front and the three-quarter rear. I also bought a 1 1/2 inch front and was told the 2 should be fine. It’s an inch higher in the front.

I dig the light bar with all the old skool Rounds lights

thanks!

 

[Tyeebo]

I have the eibach level springs and at first it was a lil bit higher but after a couple days it settled and looks perfect

Could you post pic?

 

[916Ghost]

Could you post pic?

Yeah it might not be tell tomorrow though

 

[Tyeebo]

Yeah it might not be tell tomorrow though

Hey brother, don’t forget to post a pic

 

[916Ghost]

Hey brother, don’t forget to post a pic

Yeah I will post one today for sure

 

[916Ghost]

Hey brother, don’t forget to post a pic

Here you go. Not the greatest pic but you can see how the front Eibachs helped the front out

 

[Cromin8tor]

1 1/2” Rogue front spacer and nothing on the rear spring, problem solved.

Also, I have a set of 1 1/2” Foutz levers for sale $300.00

 

[Tyeebo]

Here you go. Not the greatest pic but you can see how the front Eibachs helped the front out
View attachment 92479

Looks good man, thanks

 

[Tyeebo]

1 1/2” Rogue front spacer and nothing on the rear spring, problem solved.

Also, I have a set of 1 1/2” Foutz levers for sale $300.00View attachment 92512View attachment 92513View attachment 92514

Looks really good. Why did you end up going with the 1 1/2 rogue over the foutz 1 1/2? When I put the 1 1/2 and the 2” side by side, it was literally almost no difference maybe a couple millimeters..

 

[Cromin8tor]

Looks really good. Why did you end up going with the 1 1/2 rogue over the foutz 1 1/2? When I put the 1 1/2 and the 2” side by side, it was literally almost no difference maybe a couple millimeters..

Rouge looked better, seriously that’s why…….kinda stupid actually because you really can’t see them that well once installed…more money than sense..l guess

They’re just sitting in the drawer if you’re interested, paid $400….you can just text me if you want at 619-987-3953

 

[timinnd]

View attachment 92248

All the research and still ended up nose high​

Try putting 37s" on just the back.

 

[LArosca]

1 1/2” Rogue front spacer and nothing on the rear spring, problem solved.

Also, I have a set of 1 1/2” Foutz levers for sale $300.00View attachment 92512View attachment 92513View attachment 92514

Do you still have the extra leveling kit ?

 

[Tyeebo]

Rouge looked better, seriously that’s why…….kinda stupid actually because you really can’t see them that well once installed…more money than sense..l guess

They’re just sitting in the drawer if you’re interested, paid $400….you can just text me if you want at 619-987-3953

Shit, been off here for a few days, ordered one yesterday.