What did you do to your TRX today?

[Austinmtlhd]

I'm surprised you haven't swapped those red air filters for some blue-tinted oiled filters. Here's a pic of my air filter. The CAI added a few ponies, but the blue tint of the oiled filter took those ponies right back. So it's a wash.

View attachment 148967

Is that an aftermarket radiator or just part of the cold air intake? If aftermarket what brand is it? I went through the first radiator and am just counting the days the second one will start to leak.

 

[WDETRX]

Dropped her off to get the front/rear diff fluid changed, transfer case fluid changed, east coast drive shaft installed(no more clunk), and 37" Toyo RT pro's(37x12.50x18). Just hit 9k miles and really wanted the diff and t case fluid changed before 10k miles and having the east coast drive shaft in the '22 I had a few months ago it was first on my list for '24. I don't have time for Ram's circle jerk. Spent the money, fix it for good, and better.

 

[Eighty]

Is that an aftermarket radiator or just part of the cold air intake? If aftermarket what brand is it? I went through the first radiator and am just counting the days the second one will start to leak.

It's just part of the CAI (it's an aFe Track Series).

 

[2021HBTRX]

Decided to put some Herculiner on the skid plate.

Thought about going blue, but don't want to slow it down more than I already have

 

[Krewton]

Just got finished spot cleaning fucking tree sap from like 7pm-10pm from a bad storm recently. Then did an express normal bath after at 10pm like a mad man. Made it worth it when a neighbor walked by and said “looks great, nice job” lol. I can rest easy now knowing my baby is clean and sap isn’t baking on in the 90-100degree heat

 

[WDETRX]

37x12.50x18 Toyo RT Pros installed. Curious as to what some think I need to have the pressure set at. The shop has them at 48/46 which I feel is a little high. Was thinking 40/38. Truck never leaves pavement.

 

[Two]

Load charts are our friend.

Until you get the axle weights, chalk will get you close.

 

[2021HBTRX]

37x12.50x18 Toyo RT Pros installed. Curious as to what some think I need to have the pressure set at. The shop has them at 48/46 which I feel is a little high. Was thinking 40/38. Truck never leaves pavement.

I am running 38 all around on mine seems to be nice and smooth.

 

[Two]

I am running 38 all around on mine seems to be nice and smooth.

Since 38 is correct for the smaller OE tires, and only at max load, it has to be too much.

 

[FULLTHROTTLERICK]

I wouldnt run more than 33-34psi unless ur max effort towing. We run 32 on all 4 corners and we’re like 8500lbs during daily driving lol

 

[slivoman]

I wouldnt run more than 33-34psi unless ur max effort towing. We run 32 on all 4 corners and we’re like 8500lbs during daily driving lol

This

 

[WDETRX]

I wouldnt run more than 33-34psi unless ur max effort towing. We run 32 on all 4 corners and we’re like 8500lbs during daily driving lol

Ahh okay that makes sense. The shop had them at like 45 and it rode rough. Lowered to 40 and rode much better. So maybe after she sits in the garage for a bit air them down to about 34/35 and should be good?

 

[Two]

Unless there's a fair amount of stuff in the bed, the rears should be lower than the front. That's the whole point with load charts, to have the correct pressure for a given axle weight with a certain size tire.

At least do a chalk test so you know when the pressures are are getting close to correct, instead of sacrificing handling, tire life, etc. while guessing.

 

[BigRay]

Installed some badging that had been sitting on the work bench along with the JMB Intake.

View attachment 148960View attachment 148961View attachment 148962

Looks beautiful! Appreciate the business and allowing us to make your truck look even better!

 

[FULLTHROTTLERICK]

Ahh okay that makes sense. The shop had them at like 45 and it rode rough. Lowered to 40 and rode much better. So maybe after she sits in the garage for a bit air them down to about 34/35 and should be good?

Yea wait till 10pm tn when they're dead cold and send em down to 33-34 for sure

 

[FULLTHROTTLERICK]

Our 200th Video!! The FINALE of TRX on Switchback – HANDS DOWN our Favorite Badge Trail to date

 

[TRXMIKE]

Our 200th Video!! The FINALE of TRX on Switchback – HANDS DOWN our Favorite Badge Trail to date

Think they need to start making TRX badges of honor for you Rick!

 

[FULLTHROTTLERICK]

Think they need to start making TRX badges of honor for you Rick!

I'M HERE FOR IT BRO!! Great idea!!!

 

[LTCBPL]

I changed the bedside TRX decals to satin black to give it the subdued look just after I bought it last year. Today I added the TRex head also in satin with red eye from Underground Graphics.

 

[Serial_TRXer]

Replaced the thermostat. Old one got up to 212* yesterday morning. Not good for a 180* stat.
PSA for those with an S&B - the torx screws that attach the bracket to the intake were all unthreaded, but luckily stayed in place.

Also, ran into the OG.