Traction Boards

[04Ram2500Hemi]

So the one thing I don’t have in the truck that I’ve given a lot of thought to is Traction Boards. After watching the Raptor R video below, I think it’s something I need to buy. I’m looking at the following setup but wondering what others think?

Traction Boards:

GoTreads TRK - Technical Recovery Kit

The ultimate vehicle traction tool bundle for serious off-roaders, offroad clubs, firefighters, search and rescue, and outdoor professionals.

gotreads.com

Stuck Raptor R:

 

[esm]

I've used them before to help pull a truck out of deep sand that was burried to the axel. I probably could have pulled them out without the boards but since I had them it was even easier.

I have something like this but don't remember what brand.

ActionTrax Recovery Boards - Orange Pair | USA-Made Off-Road Traction Trax

USA-made ActionTrax recovery boards get you unstuck fast. Military-tested, Baja-proven design with sawtooth ends. Durable orange pair for serious off-roaders.

usactiontrax.com

 

[04Ram2500Hemi]

I've used them before to help pull a truck out of deep sand that was burried to the axel. I probably could have pulled them out without the boards but since I had them it was even easier.

I have something like this but don't remember what brand.

ActionTrax Recovery Boards - Orange Pair | USA-Made Off-Road Traction Trax

USA-made ActionTrax recovery boards get you unstuck fast. Military-tested, Baja-proven design with sawtooth ends. Durable orange pair for serious off-roaders.

usactiontrax.com

Thank you for the link. I’m looking at these too.

ULTIMATE SERIES | Exitrax

exitrax.com

 

[esm]

Those look good and they are cheaper too! I don't think you can go wrong either way.

 

[Trunty]

The generic ones are fine, but they are great to have. Just don’t throttle whenusing them. I see a lot of people ruin theirs by doing that.

 

[Dudebro]

We always use maxtrax. They work great in Baja.

 

[ParadigmDawg]

ARB, Maxtrax and Smith Smitybuilt are all popular. I have never been in a situation where they would have helped much. A winch is much better.

If I was around sand, I would have them.

 

[04Ram2500Hemi]

We always use maxtrax. They work great in Baja.

Extreme or MKII?

 

[Dudebro]

Extreme or MKII?

I actually didn’t know there were different versions. Just looked, MKII. We don’t need them often but they are clutch in sand, silt, mud, etc

 

[04Ram2500Hemi]

I actually didn’t know there were different versions. Just looked, MKII. We don’t need them often but they are clutch in sand, silt, mud, etc

Thanks for the info. I think the Maxtrax is the answer. Now I need to figure out the best way to store them in the bed. Maybe something like this:

3rd-5th Gen Ram 2500/3500 RamBox Bulkhead Molle Panels

Wondering how to order Icky Concepts Products? The owner of Icky Concepts decided to move on to other projects and spend more time with family, so we’re absorbing the brand under the CJC Built name and continuing production here in the USA. The owner continues to work with us on new designs and...

ickyconcepts.com

 

[esm]

I have this one and it attaches without having to drill holes in the bed. The one you linked would definitely carry more weight.

195203-X - Putco Bulkhead MOLLE Panel - Fits Dodge Ram Truck 1500 2019-2027

Putco Bulkhead MOLLE Panel - Part # 195203-X. Manufactured by Putco, Inc. Des Moines, IA.

www.putco.com

 

[ParadigmDawg]

I have this one and it attaches without having to drill holes in the bed. The one you linked would definitely carry more weight.

195203-X - Putco Bulkhead MOLLE Panel - Fits Dodge Ram Truck 1500 2019-2027

Putco Bulkhead MOLLE Panel - Part # 195203-X. Manufactured by Putco, Inc. Des Moines, IA.

www.putco.com

View attachment 93978View attachment 93979View attachment 93980View attachment 93981

I wonder if that will mount with my BuiltRight Molles?

 

[esm]

I wonder if that will mount with my BuiltRight Molles?

It does, I have the BuiltRight panels on the side.

 

[ParadigmDawg]

It does, I have the BuiltRight panels on the side.

Nice, I may need that but it is pricey....

 

[rao26]

Thanks for the info. I think the Maxtrax is the answer. Now I need to figure out the best way to store them in the bed. Maybe something like this:

3rd-5th Gen Ram 2500/3500 RamBox Bulkhead Molle Panels

Wondering how to order Icky Concepts Products? The owner of Icky Concepts decided to move on to other projects and spend more time with family, so we’re absorbing the brand under the CJC Built name and continuing production here in the USA. The owner continues to work with us on new designs and...

ickyconcepts.com

You could store them above the bed but then you’d run the risk of people thinking your TRX is just a big Tacoma. Every Tacoma in my area has these for some reason. They’re all decked out like prospector xls.

 

[04Ram2500Hemi]

I have this one and it attaches without having to drill holes in the bed. The one you linked would definitely carry more weight.

195203-X - Putco Bulkhead MOLLE Panel - Fits Dodge Ram Truck 1500 2019-2027

Putco Bulkhead MOLLE Panel - Part # 195203-X. Manufactured by Putco, Inc. Des Moines, IA.

www.putco.com

View attachment 93978View attachment 93979View attachment 93980View attachment 93981

I like this a lot!

I wonder, can you store two Traction Boards to it? It kind of looks like they just have one on the website.

 

[esm]

I'm sure there are several ways to mount them. All you would need is a universal type of mount like this.

Check this out! https://a.co/d/1MK8M3r

 

[esm]

These guys might have a mounting solution.

QUICK FIST Clamp Mounting Kit - Item #90010

Three of our top selling clamps in one money saving package! Each package contains 2 MINI QUICK FIST clamps; 4 Original QUICKFIST clamps; and 2 SUPER QUICK FIST clamps. Save $12.60 VS buying the same items individually. Item #90010

quickfist.com

 

[ParadigmDawg]

Builtright has Rotopax mounts for Molle panels so that would be a great solution for the right boards

 

[04Ram2500Hemi]

Ended up ordering the Putco Bulkhead Molle and the Maxtrax. I’ll post pictures when everything is delivered and installed.