Question About Long Tubes vs. High Flow Cats

FULLTHROTTLERICK

| NO FEAR |
4x TRX of the Month 🏆
2x Video of the Month 🏆
Joined
Jul 6, 2022
Messages
6,814
Gallery
1,112
Reaction score
7,545
Location
Jacksonville
GOAL: Looking for the cheapest way to get that sweet long-tube sound without CELs, without needing a tune, and without losing all my low end power. I know if i make it too free-flowing, I'm gunna make the truck gutless on the bottom end which I def dont want.

(Q1) Those who have them, are you tuned? I've only installed long tubes on 1 other vehicle and we were tuning it. I've installed bogus shorty headers on a few vehicles with no tune needed (likely cause gains were crap). Not wanting to tune our truck yet so trying to figure out if i can get away with it on the OEM tune.

(Q2) What's the forum consensus on doing headers only vs. doing cats as well? The cost of the headers w/cats is probably outta my budget but I'm curious nonetheless.

(Q3) Which brand do you guys recommend? I had cheap PACE long tubes on a supercharged Raydo and they sounded great. I've also seen Kooks SS tubes on my dad's vette. I dont need that triple ceramic infused titanium nonsense. They'll be covered in mud anyway haha

TIA!
 
I have Kooks with no cats.
My truck is tuned
I think the more you increase power the shorter the cats will live.
I kept the exhaust stock when I did pulleys, injectors and tuned for E85. I didn’t think I’d gain enough for the price.
When I added the cam and IC chiller I went ahead and did the headers.
I really like the sound and the smell isn’t bad with E85.
I hope any of that helps.
 
I run SW with cats and absolutely love the sound paired with AWE. I picked them up when on sale from @Nick797

I can't say for sure, but unless you're running shorty headers you definitely need a tune. I can't recall exactly what my numbers were, but gained a little power and I was really only doing it for the sound which is second to none!

Next year I am swapping over to E85 so I can add a little more boost. I don't think cheap and headers belong together.
 
I have Kooks with no cats.
My truck is tuned
I think the more you increase power the shorter the cats will live.
I kept the exhaust stock when I did pulleys, injectors and tuned for E85. I didn’t think I’d gain enough for the price.
When I added the cam and IC chiller I went ahead and did the headers.
I really like the sound and the smell isn’t bad with E85.
I hope any of that helps.
that's gotta be loud AF no? Got a quick clip?
 
I run SW with cats and absolutely love the sound paired with AWE. I picked them up when on sale from @Nick797

I can't say for sure, but unless you're running shorty headers you definitely need a tune. I can't recall exactly what my numbers were, but gained a little power and I was really only doing it for the sound which is second to none!

Next year I am swapping over to E85 so I can add a little more boost. I don't think cheap and headers belong together.
Yea i'm only doing it for sound which is why i could care less if they're made of cast or SS/titanium/etc. If & when i pulley down in a couple years, they'll be there to keep things flowing well. Got a sound clip of start-up and/or revs? You running high flow cats or OEM?
 
Yea i'm only doing it for sound which is why i could care less if they're made of cast or SS/titanium/etc. If & when i pulley down in a couple years, they'll be there to keep things flowing well. Got a sound clip of start-up and/or revs? You running high flow cats or OEM?

Running the SW cats if you can call them that they are tiny and not sure they do much. I need to get some clips I'll try this weekend. On auto can keep it tame, but most of the time I'm annoying everyone I pass 😂
 
GT Haus Cats are the answer. I added these with the Borla atak and it’s a game changer. No CEL, no tune and sounds awesome.
 
Last edited:
  • Like
Reactions: DMR
Cats only w/no long tubes? Let's hear it man! We have a modified poor man's Borla ATak at the moment (with a little H-pipe in there) so we should have had a pretty similar sound to yours b4 the cats

Are these the Cats you have? https://www.gthaus.com/products/ram...bd2-400-cel-sport-cats?variant=47329639530723
Yes, those are it… no headers. Cold starts are real loud and has a sharp bite at initial start. Rumbles down to a nice chop at idle (almost a cammed sound), downshifts burble and up shifts burp and growl. Cruising on the highway is similar to the Borla atak alone but hammer on it and it barks.. almost nascar sounding. Super happy with this set up and fit like a glove. Sound clip below from my truck but found this other video on YouTube that sold me on it.
 

Attachments

  • IMG_0295.mov
    10.7 MB
Yes, those are it… no headers. Cold starts are real loud and has a sharp bite at initial start. Rumbles down to a nice chop at idle (almost a cammed sound), downshifts burble and up shifts burp and growl. Cruising on the highway is similar to the Borla atak alone but hammer on it and it barks.. almost nascar sounding. Super happy with this set up and fit like a glove. Sound clip below from my truck but found this other video on YouTube that sold me on it.
Videos don’t do it real justice, you can feel it in your chest when standing outside the truck. Sounds amazing! Expensive yes, but takes the exhaust note to a new level.
 
Yes, those are it… no headers. Cold starts are real loud and has a sharp bite at initial start. Rumbles down to a nice chop at idle (almost a cammed sound), downshifts burble and up shifts burp and growl. Cruising on the highway is similar to the Borla atak alone but hammer on it and it barks.. almost nascar sounding. Super happy with this set up and fit like a glove. Sound clip below from my truck but found this other video on YouTube that sold me on it.
that does sound good! Got any rev clips of your truck by chance?
 
that does sound good! Got any rev clips of your truck by chance?
I actually don’t but I need to do that. Will try and get one this weekend.

The YouTube video shared above is the atak with the gt haus cats, so my set up…. Best vid I have seen with the cats so far.
 
Have my truck at the shop now doing long tubes and a cam. Should be picking it up today.
Truck is tuned though.
Tubes helped psi drop from 16 to about 14 with heat and backpressure flowing out better.
Im a bit worried with it being too loud, still need the truck for an occasional family ride so well see. Truck has electric cutouts that used to be rippin' open but I might need to close them now depending on how this thing will sound
 
Have my truck at the shop now doing long tubes and a cam. Should be picking it up today.
Truck is tuned though.
Tubes helped psi drop from 16 to about 14 with heat and backpressure flowing out better.
Im a bit worried with it being too loud, still need the truck for an occasional family ride so well see. Truck has electric cutouts that used to be rippin' open but I might need to close them now depending on how this thing will sound

Was it stock exhaust with cutouts?

It's gonna be loud either way, but if you have the stock catback that will definitely help. Need to hear it chop with the cutouts open that will sound sick.
 
I actually don’t but I need to do that. Will try and get one this weekend.

The YouTube video shared above is the atak with the gt haus cats, so my set up…. Best vid I have seen with the cats so far.
Put your phone on a chair and rev that sh@t for us man! Give us some small, medium and big revs for the full range 🤘 🤘
 
Have my truck at the shop now doing long tubes and a cam. Should be picking it up today.
Truck is tuned though.
Tubes helped psi drop from 16 to about 14 with heat and backpressure flowing out better.
Im a bit worried with it being too loud, still need the truck for an occasional family ride so well see. Truck has electric cutouts that used to be rippin' open but I might need to close them now depending on how this thing will sound
which tubes and are you keeping OEM cats or getting high flow cats?
 
Videos don’t do it real justice, you can feel it in your chest when standing outside the truck. Sounds amazing! Expensive yes, but takes the exhaust note to a new level.
Dang man uve got me seriously tempted. It's hard to justify almost $2k on the high flow cats vs. like $2500 for long tubes w/connections but at the end of the day, I'm trying to keep OEM tune for the foreseeable future so this may be my only/best option to give it some more sound without CELs/etc. You've gotta post some sound clips of you revving STAT! If it sounds like that vid, i may have to drop 2Gs or beg my wife :ROFLMAO: :ROFLMAO:
 
Have my truck at the shop now doing long tubes and a cam. Should be picking it up today.
Truck is tuned though.
Tubes helped psi drop from 16 to about 14 with heat and backpressure flowing out better.
Im a bit worried with it being too loud, still need the truck for an occasional family ride so well see. Truck has electric cutouts that used to be rippin' open but I might need to close them now depending on how this thing will sound
Keep us posted!
 

TRX Forum Favs 👍

Back
Top