What I got.
22 lvl2 63k miles
The codes I've got.
p26ea. P2634. U016c. P2633.
From my little bit of snooping around the interwebs these are all fuel pump/control module related.
Just looking to get going in the right direction and hopefully save myself some time.
What ive done so far.
Check the connection and the control modules (at the end of the tank)
Used my handy scan tool to reset the light (came back immediately)
Also watched fuel pressure idle, cruising and WOT was a steady 79-80psi.
Im currently driving the truck around to get down below a 1/4 tank
in case I need to drop the tank
One final code I got from the dash itself was P120B (not to sure what that one is yet)
I appreciate any guidance
Thanks
22 lvl2 63k miles
The codes I've got.
p26ea. P2634. U016c. P2633.
From my little bit of snooping around the interwebs these are all fuel pump/control module related.
Just looking to get going in the right direction and hopefully save myself some time.
What ive done so far.
Check the connection and the control modules (at the end of the tank)
Used my handy scan tool to reset the light (came back immediately)
Also watched fuel pressure idle, cruising and WOT was a steady 79-80psi.
Im currently driving the truck around to get down below a 1/4 tank
in case I need to drop the tank One final code I got from the dash itself was P120B (not to sure what that one is yet)
I appreciate any guidance
Thanks
