Issues with Method wheels and TPMS?

[hobbez84]

Long story short, I purchased some MR305 NV wheels for my TRX, and had a friend who is a manager at a Nissan dealership install them. However, his tech had issues with installing the TPMS onto the method wheels, and mentioned the hole on the wheel is too small. I can confirm the wheels are proper for the TRX (bought it from a vendor here), and they mailed out the correct wheels.

I've done a quick search, and saw that this was not an issue for anyone else, so I'm curious if the tech was just having some bad luck, or if I need a special aftermarket sensor.

 

[Fifty]

I had no problems.

 

[Fifty]

Here is my wheels and tpms

 

[916Ghost]

I had no problem on mine

 

[Ronin47]

Long story short, I purchased some MR305 NV wheels for my TRX, and had a friend who is a manager at a Nissan dealership install them. However, his tech had issues with installing the TPMS onto the method wheels, and mentioned the hole on the wheel is too small. I can confirm the wheels are proper for the TRX (bought it from a vendor here), and they mailed out the correct wheels.

I've done a quick search, and saw that this was not an issue for anyone else, so I'm curious if the tech was just having some bad luck, or if I need a special aftermarket sensor.

Did the tech use a tpms pull through tool?

 

[hobbez84]

Did the tech use a tpms pull through tool?

I'm not certain, I can ask tomorrow when I bring the truck back to fine tune the balance

 

[hobbez84]

Problem found and solved. The local CDJR parts dept. gave us the wrong stem. Once the correct stems were identified, all the issues went away.