Debadging

[Jackson]

Just so I'm clear..... The sides of the truck can be stripped of the badging to reveal a smooth surface.... The large RAM on the tailgate cannot. Everything else is fine. Is that correct?

 

[KnightMare]

Just so I'm clear..... The sides of the truck can be stripped of the badging to reveal a smooth surface.... The large RAM on the tailgate cannot. Everything else is fine. Is that correct?

The only badge you have to worry about is the RAM on the tailgate. Only one with location holes.

 

[JRex]

Just so I'm clear..... The sides of the truck can be stripped of the badging to reveal a smooth surface.... The large RAM on the tailgate cannot. Everything else is fine. Is that correct?

 

[Elarson6772]

View attachment 5703


View attachment 5704

View attachment 5705

Can I ask where you got the TRX badges? Are they the factory badges from the rear? Id like to do the same and add a hellcat head as well.

 

[TReX-RAM]

The only badge you have to worry about is the RAM on the tailgate. Only one with location holes.

And the grill...unfortunately. The grill would look sweet with a “T R X” badge.

 

[KenW]

'21 was the first year for tow mirrors and 360 camera

Mine has tow mirrors. But the sticker doesn’t say 360 camera. My vin is 900452 so I was one of the first to order in August. At the time it wouldn’t let me select both. It said the surround view camera wasn’t available with trailer tow mirrors. I’m picking mine up tomorrow so I guess I’ll find out then.

 

[GabeW]

I am putting the TRX back on but wanted them to coat everything without having to trim around all the badging. I am going to place my HellRex head where the 4x4 badge was.

Which hellrex are you referring? Not sure how many badges have been made since you started that creative bad assery (yes made up word)

 

[srjones51]

I removed all of my badging before I dropped it off to be PPF'd and ceramic coated yesterday morning.

By all, I mean, both doors and the entire tailgate (TRX, 4x4 and R A M) the R A M letters will have to either be put back on, replaced with something else (thinking about either larger T R X or possibly S R T. Or you will have to have body work done to full the locating holes for the larger letters. All the small badges are just double sided tape.

As for the Grill, even if you remove the R A M lettering the structure of the grill still has the R A M outlines molded into the single piece so you would have to replace the entire grill.

Can the hood badges be removed and left off? I`m mean is there no placement holes underneath? I like the look without any badges, Thanks

 

[Superbrowndude]

Another OG Bambi thread

 

[CarbonFiber]

Does anyone have a pic of the front grill with the RAM removed?

 

[Superbrowndude]

Does anyone have a pic of the front grill with the RAM removed?

It would look weird cause it still says ram, just on a flat surface non 3d.

 

[KnightMare]

Does anyone have a pic of the front grill with the RAM removed?

You'll just have a grille with a hole that happens to spell Ram

 

[TReX-RAM]

The "RAM" is molded into the grill with letters affixed on top of the molding.
This is what it looks like when you remove the letters:

 

[Informal]

Here is how the front looks color matched.

 

[Spottswoode]

I too was hoping for an easy solution to tailgate R A M removal and replacement. Oh well, maybe just paint match them.

Regarding the grill R A M… has anyone made a replacement grille that has no R A M embedded in it? Found one, here it is, anybody here have one?

Ram TRX Bespoke Stainless Steel Front Grille (AWC Grilles) - Solis Racing Group | Performance Parts |

Upper and lower grille consist of 2 sections, please see diagram below. For paint matching or custom colors, we recommend ordering a RAW Grille. Option 1 Section 1&2 one color w/ no logo (Specify color of choice in notes) Option 2 Section 1&2 two color combo with no logo (Specify…

solisracinggroup.com