Carbon Fiber shift knob

[FULLTHROTTLERICK]

I used GE clear 100% silicone.
To make sure the piece sticks tight to the shifter while the silicone cures, use a few dabs of superglue on the outsides and middle. That will hold the CF skin without allowing it to loosen and cure with gaps.
Once you apply, press the skin down tight until it sticks for a few seconds. In a few hours the silicone will dry and that shell won't ever come off.
View attachment 122372

Hah i used a clear version to seal my gutters

 

[FULLTHROTTLERICK]

Well Jogon accepted my $45 offer lol so i guess i have a forged carbon knob coming from Shang-hai lol. Pretty hard to beat $45 though. If i dont like it i'll rig it up to my kid's side by side lol

 

[BlueTRX]

Well Jogon accepted my $45 offer lol so i guess i have a forged carbon knob coming from Shang-hai lol. Pretty hard to beat $45 though. If i dont like it i'll rig it up to my kid's side by side lol

I think you'll be impressed by how well it'll match your steering wheel...IMO all of these chinese CF is made under the same roof and same folks

 

[BlackoutTRX]

I think you'll be impressed by how well it'll match your steering wheel...IMO all of these chinese CF is made under the same roof and same folks

100%… same how Nike sneakers are made right next to eBay knock offs

 

[a143gsxr]

I do love my MHF. 75 days it took to receive. Worth the wait.

 

[260onthego]

I do love my MHF. 75 days it took to receive. Worth the wait.

Damn they're slow

 

[TrxDailyDriven]

Damn that's really nice, damn that's really slow, damn that's expensive. Damn.

 

[Z3R0IN]

I have a jogon one and it's decent. Not a perfect fit but you can't really tell unless you get up close to it. I also didn't even use the double sided film on it because it is a nice snug fit.


View attachment 122360

View attachment 122361

I have this same one and my fitment is much better than this. I have the cover for the trx buttons and it fits a little crappy but nothing noticeable.

 

[TrxDailyDriven]

I do love my MHF. 75 days it took to receive. Worth the wait.

This is beautiful. Do you find it hard to keep it clean?

 

[a143gsxr]

This is beautiful. Do you find it hard to keep it clean?

I do not have any issues. It still looks new. I’ve put 10,000 miles on the truck since I put it on. And I manual shift at some point every day. Now, I don’t eat a cheeseburger without washing my hands before driving. My stock Alcantara steering wheel is also like new and there’s 51,000 on the truck.

 

[LouDogg]

MHF Shift Knob in Matte Red and Black. It really is super high quality. View attachment 108361View attachment 108362View attachment 108363View attachment 108364

How's the Matte finish holding up? I'm in the market.

 

[ALJ]

Damn that's really nice, damn that's really slow, damn that's expensive. Damn.

Oh god, and that is lucky. My family ordered one for me for xmas, and ended up being a bday present. Took a little over 4 months from order date to receive date. Great quality.

 

[LouDogg]

Does anyone know what the sides of this shifter are made of? I asked MHF but they must be busy because they haven't responded to my email that I sent out 4 days ago.

2020-2023 Dodge Ram TRX Shifter Matte Black and Matte Carbon

****Please allow up to 35-45 business days prior to shipping due to the special ordering of this item LIMITED QUANTITIES **** PLEASE READ BELOW! *** Special ordered parts such as this item are not eligible for returns only exchange. Paying For Faster Shipping DOES NOT speed up production...

www.mhfautolighting.com

 

[FastlifeTy]

Thank you gentlemen! Got mine from MHF

 

[ALJ]

Thank you gentlemen! Got mine from MHF

I love mine and it is the same fitment as the 2027 shifter. I ported mine over and it looks great.

What didn't port over was the boot, I had a custom alcantara with the grey stitching and the 2027 interior is red, so I kept the 2027 boot.