Anyone with TREX or Hellcat side badges?

[BigRay]

Ordered some of these, adhesive was terrible and fell right off.

I can get you replacement 3M. When you installed did you thoroughly clean the surface and install them on a pretty flat area?

I have had very little issues with the 3M adhesive

 

[Livin The Dream]

Just a note to those who may not have thought about this if/when installing badges on the front doors...I installed the OEM Hellcat badges but after determining exact position and before removing the protective film from the adhesive, I very carefully contoured (bent) the badge to conform to the shape of the door!

 

[BigRay]

Just a note to those who may not have thought about this if/when installing badges on the front doors...I installed the OEM Hellcat badges but after determining exact position and before removing the protective film from the adhesive, I very carefully contoured (bent) the badge to conform to the shape of the door!

That is a very smart idea to do this to help with the slight curvature of the door.

 

[Hemi4me2]

following

 

[Robbys3m3]

Figured I'd give em a try easily removable

 

[Cromin8tor]

I went with Big-Rays T-Rex. Personal preference but I like it is made out of metal and flat looks mean.View attachment 40462View attachment 40463

 

[wac45]

View attachment 42552View attachment 42551View attachment 42550View attachment 42550

Amazing shine you have on your truck. Impressive

 

[MAMMOTHTRX]

Figured I'd give em a try easily removable

I have some of those from yofab don't think I'm going to use them so if anyone interested. How's the 3m on it?

 

[Cromin8tor]

Amazing shine you have on your truck. Impressive

Here is what the person who did my ceramic coating had written me to get that amazing gloss shine!
All Professional Grade Coatings come with a proper preparation process to fully cleanse & fully decontaminated the finish. Also includes a light correction step to remove light swirling, followed by a refinement polish to produce the ultimate gloss.

I like to ensure the paint is in appropriate condition before applying a semi-permanent, glass layer of protection. This results in a true richness of color and the ultimate shine.

Ceramic Coating Applied To:
⁃ Paint
⁃ Wheel faces
⁃ Headlights / Taillights
⁃ Plastics
⁃ High Grade Windshield Coating

5 Year - $1599*

See you then!

 

[wac45]

Here is what the person who did my ceramic coating had written me to get that amazing gloss shine!
All Professional Grade Coatings come with a proper preparation process to fully cleanse & fully decontaminated the finish. Also includes a light correction step to remove light swirling, followed by a refinement polish to produce the ultimate gloss.

I like to ensure the paint is in appropriate condition before applying a semi-permanent, glass layer of protection. This results in a true richness of color and the ultimate shine.

Ceramic Coating Applied To:
⁃ Paint
⁃ Wheel faces
⁃ Headlights / Taillights
⁃ Plastics
⁃ High Grade Windshield Coating

5 Year - $1599*

See you then!

Thanks for the info, they did an impressive job.

 

[Drbubbles84]

View attachment 42552View attachment 42551View attachment 42550View attachment 42550

What did you attach the emblem on your hitch cover to?

 

[Branden.Gray]

Purchased the TRX Red Eye; impatiently waiting for the truck to arrive to slap them on (after XPEL Stealth PPF). Thinking of painting them to match satin granite crystal.

 

[Hemi4me2]

TRX Redeye???

 

[Drbubbles84]

TRX Redeye???

I think he means the TRX dino badge with the redeye

 

[flaco74.ag]

 

[particlefield]

I decided to go with this. It fits the theme of my TRX. Some might say but it isn't a redeye and my reply is I don't give a shit. How do they know how much horsepower is underneath my hood.? What truly makes an SRT Hellcat differ from the SRT Hellcat Redeye? IMHO horsepower. Sure there are a few other differences but in the grand scheme of things, it comes down to horsepower. It doesn't take much to go from 702 to 800, a few injectors, some pullies, an upgraded thermostat, a tune, etc, etc, etc. Bam 800 HP. For those who might not agree with me putting a hellcat redeye emblem on my TRX, again I don't care. You do what you want to your truck and I will do the same to mine. In the end, we can agree to disagree. Enjoy the pictures.

View attachment 40501View attachment 40502View attachment 40503View attachment 40504

I think it would blow your mind how easy it is to get 800 crank hp and you don’t need to do that much. I can smoke a stock redeye challenger with 315s instead of 275s by half a second in the 1/8 mile with just a pulley. Granted that’s at sea level making 13-14 psi doing 88-89mph at 7.8-7.9s at the track with the whole family in it. They will take you after that once they can hook up. Still though high 11s low 12s isn’t bad when the challenger makes more wheel hp than I do at crank stock for stock.

What emblems did you order? Those the oem or knock-offs? The black matches perfectly which is what I am looking for.

 

[marksoup]

My dealer gave me those above but in Redeye version. Haven't pulled the pin on sticking them on yet. My truck is black also.

These are black and crime on eBay - thinking about going with them myself once the TRX arrives (Granite Crystal)

2 Dinosaur T-Rex Emblem Fits Dodge Ram TRX Logo 1500 3.25"x2.75" Black Chrome | eBay

High quality ABS plastic, not cheap laser cutting acrylic emblem.

www.ebay.com

Mark

 

[EndMan]

Here is what the person who did my ceramic coating had written me to get that amazing gloss shine!
All Professional Grade Coatings come with a proper preparation process to fully cleanse & fully decontaminated the finish. Also includes a light correction step to remove light swirling, followed by a refinement polish to produce the ultimate gloss.

I like to ensure the paint is in appropriate condition before applying a semi-permanent, glass layer of protection. This results in a true richness of color and the ultimate shine.

Ceramic Coating Applied To:
⁃ Paint
⁃ Wheel faces
⁃ Headlights / Taillights
⁃ Plastics
⁃ High Grade Windshield Coating

5 Year - $1599*

See you then!

What state?

 

[Sober1]

Took off the ram and put on the Oem trx

 

[TheBoz]

I think it would blow your mind how easy it is to get 800 crank hp and you don’t need to do that much. I can smoke a stock redeye challenger with 315s instead of 275s by half a second in the 1/8 mile with just a pulley. Granted that’s at sea level making 13-14 psi doing 88-89mph at 7.8-7.9s at the track with the whole family in it. They will take you after that once they can hook up. Still though high 11s low 12s isn’t bad when the challenger makes more wheel hp than I do at crank stock for stock.

What emblems did you order? Those the oem or knock-offs? The black matches perfectly which is what I am looking for.

There are OEM emblems -- 2019-2020 Dodge Challenger Front Left & Right Fender Hellcat Redeye Emblem OEM