What did you do to your TRX today?

Nice little day getting out of the city and hitting a farm in the burbs.
 

Attachments

  • Resized_20230520_183707.jpeg
    Resized_20230520_183707.jpeg
    687.4 KB · Views: 57
Spent 5 hours rerunning wire because 14 AWG did not support six rigid 360s… I did too good of a job running the first loom, taking it out and replacing with 10AWG SUCKED.
 
Spent 5 hours rerunning wire because 14 AWG did not support six rigid 360s… I did too good of a job running the first loom, taking it out and replacing with 10AWG SUCKED.
Better than burning ur shit to the ground but i hear ya man. Always better to do it right the 1st time and go 1 size bigger (technically bigger but # is smaller lol) than you think you need. You prolly would've been fine running 12ga unless you're running them from the battery to the rear bumper lol
 
Better than burning ur shit to the ground but i hear ya man. Always better to do it right the 1st time and go 1 size bigger (technically bigger but # is smaller lol) than you think you need. You prolly would've been fine running 12ga unless you're running them from the battery to the rear bumper lol
I probably would have been, but I wasn’t going to chance having to do it a third time.

IMG_1514.jpeg
 
I got this window sticker. Should be in next week.
Good way to get tree huggers to pour sugar in your gas tank… remember our tanks don’t lock.
 
Are you sleeping on the stove?

Ha right!

Went car camping the previous weekend with the family and was too lazy to take this behemoth out and replace with the smaller Coleman. It is a monster.
 
Added the Bwoody, 180 thermostat, ripatune lower pulley, and the JL catch can. Goes to the shop Thursday to install the eibach 1.6 front and 1.5 rears. Then I think I’m good for a while? Maybe a pedal commander…C6A9649A-E9F2-4256-88FF-4D66D0A5BE0E.jpeg8B142595-56CE-4AA7-9F4B-59D56D63FF89.jpeg
 

Attachments

  • D591F952-E7C8-4CCD-8A95-596975B141D3.jpeg
    D591F952-E7C8-4CCD-8A95-596975B141D3.jpeg
    348.2 KB · Views: 23
  • 1D5C927C-8066-40C3-B480-D604693CBD6C.jpeg
    1D5C927C-8066-40C3-B480-D604693CBD6C.jpeg
    408.5 KB · Views: 22
That is awesome. Was it easy to stay on wide enough trails for the TRX?
For the most part. That road only got sketchy when you met another car, but was plenty wide for our beasts. Gotta pick and choose the trails wisely out here. I’m not wanting to drag ass and ruin exhaust tips/parking sensors or loose a mirror on a narrow canyon road. But there are plenty of wide open roads and trails to run without doing damage.
 
1.Finally got my GTHaus cat back exhaust installed with Vavles open/close remote
I love it !!!
2.oil catch can upr
3.tazer
waiting on parts for custom intake...here are some cold start videos and normal drive away probably 3 k rpm
 

Attachments

  • PXL_20230520_122031122.jpg
    PXL_20230520_122031122.jpg
    175.8 KB · Views: 55
  • PXL_20230521_173505938.jpg
    PXL_20230521_173505938.jpg
    243.9 KB · Views: 55
  • pxl-20230522-122006292ts_GzsXmMHf.mp4
    4.2 MB
  • pxl-20230520-120319289ts_oyLc817W.mp4
    4.9 MB
  • VID_36620720_100115_875.mp4
    14.7 MB
  • pxl-20230520-150247507ts_gjXoZSqa.mp4
    3.2 MB
Installed the red stitched A & B pillars also installed the glove box light
 
Installed twin ARB compressor in the back under seat storage and truxedo tonneaumate as it is the only one available to fit with the rambar.
 

Attachments

  • FD6FFE5E-A6E6-4214-B99A-6D981D84E7D6.jpeg
    FD6FFE5E-A6E6-4214-B99A-6D981D84E7D6.jpeg
    302.5 KB · Views: 88
  • 1FDD95FA-33D7-49D7-A005-5DD9701AF363.jpeg
    1FDD95FA-33D7-49D7-A005-5DD9701AF363.jpeg
    374.8 KB · Views: 91
  • F20062FE-120F-40FC-B4E6-FAF102B8439E.jpeg
    F20062FE-120F-40FC-B4E6-FAF102B8439E.jpeg
    124.3 KB · Views: 89
  • 06DD3C2B-B1FA-49BE-B425-115470AC7D65.jpeg
    06DD3C2B-B1FA-49BE-B425-115470AC7D65.jpeg
    227.5 KB · Views: 85
Do the headers make u get a check engine light ? Or void any warranties ?
No check engine lights with the AR mid length headers if reusing the factory cats. Havent dealt with any warranty issues, but they shouldn't void any warranty as the factory cats are still there...but that would be a dealership's call, but they would have to prove that the headers directly caused the failure
 
Back
Top