STEK Dynomatt and Dynoshield PPF on GRANITE

LokiKai · Mar 12, 2022

I'm dropping my truck off next week for STEK Dynomatt and the wife's gets STEK Dynoshield (clear) the following week. Do any of you have STEK with decals applied over the PPF? I've been wondering how well they "stick" with the hydrophobic properties of the film. It's advertised as having Ceramic-like characteristics built in.

Ranny_TRX · Mar 12, 2022

You want to install the decals first then ppf.

LokiKai · Mar 16, 2022

Ranny_TRX said:
You want to install the decals first then ppf.

Installer is recommending installation over the PPF. Assured there will be no issue with them adhering.

Whipcat · Mar 16, 2022

I would not put the wrap over the decals, it will leave air pockets around the edges of the decals.

I have my ppf put on and then decals put on top of ppf. Worked perfect this way

LokiKai · Mar 22, 2022

Truck is now at the installer. Truck has been debadged and decals removed. Opted to have DYNOshade applied to the headlights and Tails which is huge improvement IMO. PPF started TODAY. Will post pics of progress when I get them. Here are a few of the DYNOshade.

Phillytrx · Mar 22, 2022

That looks awesome!!

LokiKai · Mar 23, 2022

Install update pics.

LokiKai · Mar 29, 2022

More update pics today.

LokiKai · Mar 31, 2022

Almost ready for decals.

Dusm · Apr 2, 2022

Looks real good too bad there are no stek installers any where close to me in MA.

LokiKai · Apr 3, 2022

Picked mine up today! Opted to leave bedside decals off for now. We went to dinner when we got back in town and had a CROWD around the truck when we parked

. A guy with a Granite Rebel was loosing his mind! Took us 15 minutes to get inside

Jackieboi.jb · Apr 3, 2022

Nice beast. That red Hood deal is factory?

LokiKai · Apr 3, 2022

Jackieboi.jb said:
Nice beast. That red Hood deal is factory?

No. It's aftermarket. The large black cowl decal is OEM replacement and I didn't replace the smaller decal that goes in front of the scoop opening. Just thought it looks better without.

Mjaestewart · Apr 3, 2022

This does look fantastic. Only way to go with the granite color. Your truck is like a celebrity now

LokiKai · Apr 3, 2022

Mjaestewart said:
This does look fantastic. Only way to go with the granite color. Your truck is like a celebrity now

The best surprise was the black on the lower part of the truck. I've never really been a fan of it but it looks amazing in MATTE. Blends in perfect with the bumpers, flares, and flaps.

Jackieboi.jb · Apr 3, 2022

Love how some of yall mod the grill. I'm having granite too and trying to map out the mods for the hood, decals and the grille. Since factory parts are quite blended in with granite color unlike white trx. Thinking choosing red to pop out

LokiKai · Apr 16, 2022

Picking up the wife's truck today. Installer sent some preview pics yesterday and last night when he got everything back together.

LokiKai · Apr 16, 2022

Road trip home. Gas stop and a Monster Peach Tea Break

brettwingfield · Apr 16, 2022

Man these look so awesome!! Congrats. I am having the hardest decision with going Matte as I love the Metallic flake. Local Installer quoted me just over $8K for whole vehicle in Matte including headlights and taillights smoked. Without having to tell me how much you spent, is that a competitive price? Did your installer use pre-cut template or hand cut? TIA advance for the info. I am envious.

LokiKai · Apr 16, 2022

brettwingfield said:
Man these look so awesome!! Congrats. I am having the hardest decision with going Matte as I love the Metallic flake. Local Installer quoted me just over $8K for whole vehicle in Matte including headlights and taillights smoked. Without having to tell me how much you spent, is that a competitive price? Did your installer use pre-cut template or hand cut? TIA advance for the info. I am envious.

I went with mostly precut. Here's why. "If" the need to replace a piece ever occurs its much easier. Unless you know where to look and are really looking hard it's near impossible to notice especially on Granite. The program my installer used to do the cuts allows for panel overlap anyway. 8K is not bad. I was a little under that with everything. We are very pleased with the quality of the installation results.