Aeroforce gauge and pod

[forcefedjunkie]

Very simple install, perfect location. Most importantly can read knock along with all the intake temps and trans parameters. Also allows programming of tire size, TPMS threshold, TPMS on/off, axle ratio, idle speed, cooling fan and intercooler pump on/off. Does a lot more than similar products.

 

[Counterfeit]

Very simple install, perfect location. Most importantly can read knock along with all the intake temps and trans parameters. Also allows programming of tire size, TPMS threshold, TPMS on/off, axle ratio, idle speed, cooling fan and intercooler pump on/off. Does a lot more than similar products.
View attachment 102193

I used to have one along with an AEM wideband gauge on my Caliber SRT-4. Scan guage is definitely useful, it also reads CEL codes but our truck already does that. It was cool tech to have back in the day.

 

[forcefedjunkie]

Mine is modiied, running a flex fuel tune and upper pulley so I have to monitor knock, can't get that on the factory dash. I also like the ease of running the fan and IC pump without the restrictions of the factory cool down mode.