ADD Bomber Bumpers (Rigid Version) Line-X

[Elarson6772]

I apologize in advance for the dusty TRX in the pics. Lol

I finally got my Bomber bumpers installed and complete. I went a bit unconventional and replaced 100% of the hardware with stainless fasteners and had the entirety of both bumpers and skid plate Line-X’d with the premium version that blocks UV damage. It took a LOT of “custom” fitting via a dremel to get everything to fit as expected but came out fantastic and will hold up to years of Michigan winters without rusting.

Next up is to finish the modifications to my Rambar and then have it coated to match. Once done, my bed cover will sit flush on the bed caps instead of the base plate of the Rambar. Stay tuned for that one.

 

[RAFFY]

Looks fantastic! I've been thinking about going this route when my 23 arrives. Line-X the ADD bumpers, fenders and the black two tone painted areas. Any reason why you chose premium over the ultra or thinner Line-X coatings?

 

[cayenne]

Nice job! I've thought about doing the same, but purchasing from ADD has just turned me off every time

 

[offroadalliance]

Nice job! I've thought about doing the same, but purchasing from ADD has just turned me off every time

We've got a bunch of their bumpers in stock if you're interested in talking options. We can get a really good bundle deal with lights too if you're interested.

 

[ROBTRX]

I apologize in advance for the dusty TRX in the pics. Lol

I finally got my Bomber bumpers installed and complete. I went a bit unconventional and replaced 100% of the hardware with stainless fasteners and had the entirety of both bumpers and skid plate Line-X’d with the premium version that blocks UV damage. It took a LOT of “custom” fitting via a dremel to get everything to fit as expected but came out fantastic and will hold up to years of Michigan winters without rusting.

Next up is to finish the modifications to my Rambar and then have it coated to match. Once done, my bed cover will sit flush on the bed caps instead of the base plate of the Rambar. Stay tuned for that one.

View attachment 50656View attachment 50657View attachment 50658View attachment 50659View attachment 50660View attachment 50661

Looks great man, I have the Bomber front bumper, I’m going to pull the trigger on the rear bumper. Any issues with the rear bumper sensors?
Also, I have to modify the hardware on the access panel when I get a chance because there’s no easy way to remove it when I need to change the oil besides pulling off the bumper.

 

[Elarson6772]

Looks great man, I have the Bomber front bumper, I’m going to pull the trigger on the rear bumper. Any issues with the rear bumper sensors?
Also, I have to modify the hardware on the access panel when I get a chance because there’s no easy way to remove it when I need to change the oil besides pulling off the bumper.

No issues for me with sensors on either. Yea the skid plate on the front has no good way to get access or easily remove. With the line-x on it installing the skid plate was a real bear.

I hit an animal and destroyed my skid plate and I am not going to line-x that part again as it’s aluminum anyway. I’m also going to change fasteners.

Btw…don’t ruin your skid plate. They get over $1000 for a new one. Ugh

 

[Sheldon]

I apologize in advance for the dusty TRX in the pics. Lol

I finally got my Bomber bumpers installed and complete. I went a bit unconventional and replaced 100% of the hardware with stainless fasteners and had the entirety of both bumpers and skid plate Line-X’d with the premium version that blocks UV damage. It took a LOT of “custom” fitting via a dremel to get everything to fit as expected but came out fantastic and will hold up to years of Michigan winters without rusting.

Next up is to finish the modifications to my Rambar and then have it coated to match. Once done, my bed cover will sit flush on the bed caps instead of the base plate of the Rambar. Stay tuned for that one.

View attachment 50656View attachment 50657View attachment 50658View attachment 50659View attachment 50660View attachment 50661

Your bumpers and lights look great. Please tell me a little bit about how you did the Rigid lights behind the grill. I’ve been looking for brackets, etc… to do that very thing on my 23 when it arrives. I can’t do the bumpers yet. Need to save a little longer. Thanks in advance.

 

[04Ram2500Hemi]

Your bumpers and lights look great. Please tell me a little bit about how you did the Rigid lights behind the grill. I’ve been looking for brackets, etc… to do that very thing on my 23 when it arrives. I can’t do the bumpers yet. Need to save a little longer. Thanks in advance.

Take a look at @Boosted ’s site for the behind the grill setup. You can now go Rigid or Baja Designs. I have the Rigid setup myself ( it was before the Baja Design kit). I also have his Rigid A-Pillar Kit and backup lights along with some other lights.

Shop

Apart from selling ready-made variants, we also perform custom fabrication for off-road auto parts so you’ll achieve the unique look you’ve always wanted.

brawlerfab.com