- Joined
- Jun 28, 2021
- Messages
- 1,790
- Gallery
- 79
- Reaction score
- 2,470
- Location
- Palm Harbor, Fl
- Current Ride
- 2022 TRX
- Current Ride #2
- BMW 535i / Supra GR / Indian Chieftain Limited
So I had mounted a Gold Star holster on the driver side interior of the center console. It has a Velcro mounting pad with adhesive on one side that you stick to the smooth plastic of the interior console side wall. The holster portion then attaches by Velcro to the mounting pad. The adhesive pad itself is pretty large, approx 3 x 6 so it is a pretty large contact area.
Initially this held in place just fine but after a few months (this was over the summer) I think the heat within the cab when it was parked outside during the day weakened the adhesive and it would detach from the console wall.
I was considering putting screws into the console sidewall to hold it securely. Has anyone put screws in the interior sidewall of the console and if so what type of screw is best to use and length to ensure it doesn't go all the way through the side?
Or has anyone used an adhesive that stands up to the heat encountered by a closed up cab sitting in the sun?
Opinions and suggestions welcome.
Initially this held in place just fine but after a few months (this was over the summer) I think the heat within the cab when it was parked outside during the day weakened the adhesive and it would detach from the console wall.
I was considering putting screws into the console sidewall to hold it securely. Has anyone put screws in the interior sidewall of the console and if so what type of screw is best to use and length to ensure it doesn't go all the way through the side?
Or has anyone used an adhesive that stands up to the heat encountered by a closed up cab sitting in the sun?
Opinions and suggestions welcome.