Pics of 20x10 -18 offset - They would really help!

DIABLOPOWER702 · Nov 9, 2022

Fuel Twitch with Nitto Recon Grapplers

RageWhite · Nov 9, 2022

TheBoz said:
The Nitto Recon Grappler speed rating varies depending on the size of the tire and wheel. The speed rating for the size tire I am looking at is R - up to 106 mph -- Nitto Recon Grappler A/T 35X12.50R20LT 125R F.

My local tire shop sells the Nitto Ridge Grapplers and the Nitto Recon Grappler A/T for the size 35X12.50R20LT. The cost difference for me between the two sets of tires is $238.34 for a set of 4. You made a comment that you rarely go that fast but you like the idea of having a higher speed rating on the off chance that you do. I was saying I am trying to decide whether it is worth the extra cost to gain a 6 mph speed rating for the size wheel and tire combination I am looking at on the off chance I may find a need to exceed 100 mph. The Nitto Ridge Grapplers I originally looked at only have a speed rating of Q, up to 100 mph.

Totally understand what you were getting at...was just offering another vendor in an attempt to be helpful. Q speed rating is
up to 99mph, so 7mph difference.

TheBoz · Nov 9, 2022

RageWhite said:
Totally understand what you were getting at...was just offering another vendor in an attempt to be helpful. Q speed rating is
up to 99mph, so 7mph difference.

Sorry for the lengthy explanation, I just realized I read your reply wrong.

ChemLab · Nov 9, 2022

DIABLOPOWER702 said:
Fuel Twitch with Nitto Recon GrapplersView attachment 55298 View attachment 55299 View attachment 55300 View attachment 55301

Nice! So, the poke appears to be pretty minimal, and you are running flaps. Do you have any rubbing or a level kit? Thanks!

DIABLOPOWER702 · Nov 9, 2022

ChemLab said:
Nice! So, the poke appears to be pretty minimal, and you are running flaps. Do you have any rubbing or a level kit? Thanks!

Running WeatherTech flaps, as it sticks out just enough to keep your truck dirty. Only rubs in full lock, no level kit. Glad I could help.

ChemLab · Nov 9, 2022

Got it - I plan to run a Rogue kit or Eibachs, so you're the third or fourth saying minimal rub with no level. I should be good to go. I like the fact you can run Weathertechs, I had those on my 22 and they were quite good and looked factory. Thanks!

I-like-hp · Nov 10, 2022

Nitto ridge grappler 325/60R20 (35.5” tire) on 20x10 Hostile wheels with -19 offset.

ChemLab · Nov 10, 2022

Nice! Leveled? Any rubbing? @I-like-hp

I-like-hp · Nov 10, 2022

ChemLab said:
Nice! Leveled? Any rubbing? @I-like-hp

Just a tiny bit when turning left. Stock suspension.

ChemLab · Nov 10, 2022

I-like-hp said:
Just a tiny bit when turning left. Stock suspension.

Thanks! What's the poke? About half inch?

I-like-hp · Nov 10, 2022

Here ya go!

ChemLab · Nov 11, 2022

Yep - consistent with what I have seen - not much poke. Thanks!

BCH · Nov 12, 2022

RageWhite said:
Full disclosure: this is not my truck--it belongs to another forum member. With that said, these are the rims sitting in my garage waiting to be installed on my truck! They are HF6-4 20x10 -18's.

35s or 37s

RageWhite said:
Full disclosure: this is not my truck--it belongs to another forum member. With that said, these are the rims sitting in my garage waiting to be installed on my truck! They are HF6-4 20x10 -18's.

35s or 37s on the white TRX? Beautiful rug. Those wheels and tires perfect look imo.

F@STFreddy · Nov 12, 2022

My rims arrive next Monday. I ordered 20x10 with a -18 Offset. I already have Falken Wildpeak AT3 325 60-20 tires going on and the SCD lift springs. I’ll throw pics up in a week or 2 when they arrive and I can get everything installed. From what I saw, that was the best looking offset and wheel size setup to me!

ChemLab · Nov 12, 2022

F@STFreddy said:
My rims arrive next Monday. I ordered 20x10 with a -18 Offset. I already have Falken Wildpeak AT3 325 60-20 tires going on and the SCD lift springs. I’ll throw pics up in a week or 2 when they arrive and I can get everything installed. From what I saw, that was the best looking offset and wheel size setup to me!

Looking forward to it! I ordered Vossen HF6-5 in 20x10 -18 satin black with blue center caps from @CustomPerformance.

Great guy and vendor. Highly recommend!

ExT · Nov 12, 2022

@ChemLab. I have done quite a lot research about concave wheels just like you. I do really like the deep concave but really don’t like the -44 off set as the wheels stick out too much. Unfortunately, in order to achieve this, -44 or more is the only way. I’ve also seen some -18, -12 wheels in real life, the -18 looks pretty shallow wile the -12 looks almost flat.