- Joined
- Aug 6, 2021
- Messages
- 5,290
- Gallery
- 631
- Reaction score
- 11,270
- Location
- Nashville, TN
- Current Ride
- '22 TRX (Level 2)
Following - I'd like to find a solution for power-folding lights on a Rambar!!
Aftermarket. I took the top of a GoRhino power actuated light bar and welded my own “Rambar”. But fits in the garage when the lights are downPower actuated on rambar or aftermarket? I’ve been trying to figure out a solution to rambar lights and garage height!
Be aware of that though. I bought it and the parts are not great. The only thing worth it was the base and the light asset itself. The posts are cheap and I broke the threads on mine without even tightening them down. Really a piece of crap for what you have to pay.There’s been mention of this on the forum
Go Rhino Sport Bar 2.0 | RealTruck
Get the Go Rhino Sport Bar 2.0 from RealTruck fast with free shipping in the lower 48 United States. Our team of product experts, extensive image galleries, and legendary customer service make it easy to get the right part the first time.www.gorhino.com
Yes, with lights up, I'm not even close to fitting in my garage and most public garages.Yeah we all need some sort of auto folding actuator setup for these lights. With the 360s I've noticed I lose a good bit of clearance now for some of the usual places I go.
The brackets have one bolt to loosen then allow them to swivel as to not lose any height. The amount that I off road at night is minimal so to jump out and swivel lights up when I need them is worth the short amount of time it takes for me.100% agreed. I would install lights in a heartbeat if they folded down and did not extend a single bit above the current Rambar height (I only have 1/2" to spare in my garage, so fractions of an inch matter to me).
Can you share any details on mounts and wiring? What mounts attach the LP6 to the Ra,bar? Which wiring harnesses you used to wire the LP6s? Did you route through the Rambar?Just got my lp6's installed today. 2 white 2 amber. Holy hell talk about turning night into day lol.
View attachment 52551View attachment 52552
LP6 comes with Mount. The harnesses from BD only accommodate 2 lights… you are best off wiring yourself. (They come with a Deutsch connector to run your wires to)Can you share any details on mounts and wiring? What mounts attach the LP6 to the Ra,bar? Which wiring harnesses you used to wire the LP6s? Did you route through the Rambar?
I used these mounts -Can you share any details on mounts and wiring? What mounts attach the LP6 to the Ra,bar? Which wiring harnesses you used to wire the LP6s? Did you route through the Rambar?
…that’s what she said…100% agreed. I would install lights in a heartbeat if they folded down and did not extend a single bit above the current Rambar height (I only have 1/2" to spare in my garage, so fractions of an inch matter to me).