What did you do to your TRX today?

Ugggg, that bites. Sorry that happened. If you haven't already, time to get face time with the manager/owner.



Yes, I plan have a discussion with them...That said, I will not be taking my truck back to them.
 
The whine of the SC is amazing! I also installed new back up lights. Still waiting on Oricle 7” lights to be shipped.
 

Attachments

  • 5433B51A-2FED-4B97-897B-907D110EC0E7.jpeg
    5433B51A-2FED-4B97-897B-907D110EC0E7.jpeg
    328.7 KB · Views: 147
  • 66928E20-EDCF-4EB9-9B09-13FB849E917A.jpeg
    66928E20-EDCF-4EB9-9B09-13FB849E917A.jpeg
    319 KB · Views: 148
  • B9D45C1A-9B1D-44AD-9838-923CA08E3D43.jpeg
    B9D45C1A-9B1D-44AD-9838-923CA08E3D43.jpeg
    306.1 KB · Views: 149
Installed QTP cutouts with progressive remote. See some notes, observations, and remote install photos here.
 
More on poor XPEL PPF install...
On closer inspection today it seems obvious that while these guys can do good work (I have seen some cars that looked very good) they must have thought F' it's a pickup truck-lets let the rookies practice...who clearly do not give a damm.

1, Already the XPEL stealth on some edges of the rockers is lifting, the stealth on the rockers is not even close to the paint line on the inside of the door sills, stealth between the rear wheels and bumper leaves a large gloss portion as the stealth is only on the very front of the panels and NOTHING is wrapped! I asked when I dropped it off if the fender flares needed to be removed and they said they could tuck it back nicely without removing the flares-they just applied to the very front flat areas and no tucking anywhere-even where it would have been very easy.
2, Partial clear XPEL PPF on right rear fender looks as though a small section was cut with a very dull knife-very rough edge. Also, the way they did the partial on the rear fenders offers zero protection above the wheel well line...
3, They supposedly cleaned and ceramic coated the wheels and while they pealed one of the square factory paper stickers from the wheel, they were too damm lazy to use goof off and remove the adhesive residue before coating right over it!

View attachment 42177

View attachment 42178

View attachment 42179

View attachment 42180

View attachment 42181


Note: The shop that did the PPF is NOT the same guys who did the tint!
Fastlane Auto Tint in South Scottsdale did the tint and they did an outstanding job!

What shop did you use for the PPF? I used Tint Cartel in Mesa for my tint, PPF and ceramic coating, and they did a great job. Mine was also the first TRX they had done(last September). PPM me if you don't want to post the shops name here.
 
Gathered all my parts for it, planned my break in trip, and stalked it's movements.
Screenshot_20220630-161221_Ram.jpg
 
I drove mine like I stole it... all day long! LOL
 
BD Reverse Lights
I had these on my 2500 and loved them. What part number did you use and was it a bolt on? No customization to make them fit?
 
I got my mount last week. I was going to going to go with smittybuilt but I think I’ve changed my mind. Warn it is.
The problem with most winches is the physical clutch on them, there is no way to get to it if you mount the skid plate. Highly recommend getting warn which lets you engage and disengage clutch wirelessly.
 

Latest Discussions...

RAM-TRX Vendors

justboltons.com BwoodyPerformance.com Granger Chrysler Jeep Dodge RAM OffRoadAlliance.com/ solisracinggroup.com Mark Dodge.com AirRyd.com Forced Induction Interchillers SDHQ Motorsports
Back
Top