Anyone not comfortable with determining location for the hole, reach out to me and I’ll figure it out for you.
My ex kinda looked that way topless
Is your exhaust stock?Not a drone but my son took this video hope it helps with viewing the out put
YESSSS! Mind made up!! Thanks @Smoke kingNot a drone but my son took this video hope it helps with viewing the out put
Ya it's just cold out and when your in the truck you can't here the exhaust but outside it's pretty loud stock
That's what my neighbors say and from the video I now understand what they mean
lol, I bet your neighbors love you!Not a drone but my son took this video hope it helps with viewing the out put
Been here 14yrs and I'm relocating to GA or TX this yearlol, I bet your neighbors love you!
Most likely TX so They don't have much of a choice but to take it Shit when I had my 2020 Widebody Hellcat Charger and the TRX I use to start both at the same time early in the morning Talk about loud that shit use to shake my house I only got rid of it in October cause of my neck surgery it was hard to get in and out the car and it was just sitting in my garage collecting dust so when the used car market was up they gave me 12 thousand more than I was offered a year before so I took it
haha, right on! 'Merica!Been here 14yrs and I'm relocating to GA or TX this year
@Smoke king I would love some clarification on this. I know its been a while since the install though. So can you tell me what color wire went to the aux for the spot? Also, am I correct in assuming that you tapped the 2 others to the appropriate wires, both on the headlight? And you did this separately for each light to the corresponding headlight? Any idea how to determine which wire to tap????The 2 top wires you have to tap into but just a heads up you can't jump them from one light to the other you have to wire them separately or it will short out when you put the spot lights on
You have to tap into the wiring harness for the headlight@Smoke king I would love some clarification on this. I know its been a while since the install though. So can you tell me what color wire went to the aux for the spot? Also, am I correct in assuming that you tapped the 2 others to the appropriate wires, both on the headlight? And you did this separately for each light to the corresponding headlight? Any idea how to determine which wire to tap????
Finally, the last/4th wire went to ground yes? Black?
Im shitting bricks over this install.
Each oracle light has to tap into each headlight harness
You have to tap into the wiring harness for the headlight
The 2 top white wires in the photo are the ones you have to tap into
One is going to be for the white x, the other will be for the amber x
Oracle light harness
Yellow wire is your amber X, white wire is your white X, Red Wire is your spot light that goes to your Aux Switch, and the Black wire is your ground
Best type of tap would be a Posi-Tap type tap rather than a Scotch-Lock type.
So the tool I used made the hole perfect but there just off as I should have taken the measurements for the 7" light but it's not that noticeable
FYI the 7 inch lights are a tight fit but still perfectly fitting
The kid and instructions are great other that step 6 and what I mentioned above
Also if your not electronically inclined you will need professional help
I have the Amber X hooked up to my park light, the white X DRL (Auto), and the spot light to 1 of my Aux switches
