Rambar Mod

Don

TRX Fanatic
Joined
Jan 5, 2021
Messages
174
Gallery
73
Reaction score
375
Location
Pennsylvania
Current Ride
2018 Trackhawk
Current Ride #2
2014 Z28
Military
USAF - VET
Well, The problem stems from my truck not fitting in my garage with the Rambar.
 

Attachments

  • image11.jpeg
    image11.jpeg
    342.8 KB · Views: 335
  • image13.jpeg
    image13.jpeg
    460.2 KB · Views: 217
  • image12.jpeg
    image12.jpeg
    590.6 KB · Views: 218
So, I removed the Rambar!
 

Attachments

  • image9.jpeg
    image9.jpeg
    247.7 KB · Views: 197
  • image10.jpeg
    image10.jpeg
    267.6 KB · Views: 197
  • image0.jpeg
    image0.jpeg
    262.2 KB · Views: 191
  • image1.jpeg
    image1.jpeg
    309.1 KB · Views: 180
  • image0.jpeg
    image0.jpeg
    352.3 KB · Views: 180
  • image8.jpeg
    image8.jpeg
    410.7 KB · Views: 196
The plan is to lower it 2.5 inches which will get me below the top of the fin but above the 3rd brake light.
 
Last edited:
I made a jig to hold it and removed the side panels.
 

Attachments

  • image1[1].jpeg
    image1[1].jpeg
    343.1 KB · Views: 107
  • image0[1].jpeg
    image0[1].jpeg
    400 KB · Views: 105
Be sure you don't block your rear view mirror. ;)
 
I made a jig to hold it and removed the side panels.
That ram bar does not look all that complicated. There should be plenty of aftermarket units coming up on the web soon. Curious about the backup camera location. Will lowering the ram bar interfere with the backup camera?
 
I’ll buy it off you, if willing to sell.
 
how high was the truck with the rambar?
 
Be sure you don't block your rear view mirror. ;)
Since I plan on being above the third brake light it should not be a problem.
 
Sent it off to the welder today and I'll post prior to LineX.

I'll add some measurements tomorrow.
very cool but i was super interested in knowing what the height of the truck is with the rambar unmodified, by chance do you have it in inches?
 
interesting, so the truck is 80.9 with the antenna i believe

how are you modifying it? I may need to do the same
 
The plan is to lower it 2.5 inches which will get me below the top of the fin but above the 3rd brake light.
Don, how much higher is the Rambar than the antenna fin?
 
Don, how much higher is the Rambar than the antenna fin?
i read here on the forum finllay (took me a month to find the info lol) - " dont quoate me 82.4" with rambar "
 
Don, how much higher is the Rambar than the antenna fin?
 
Now to fill the low spots then LineX!
 

Attachments

  • Screen Shot 2021-03-01 at 11.45.46 AM.png
    Screen Shot 2021-03-01 at 11.45.46 AM.png
    1.4 MB · Views: 176
  • Screen Shot 2021-03-01 at 11.41.59 AM.png
    Screen Shot 2021-03-01 at 11.41.59 AM.png
    823.4 KB · Views: 174

RAM-TRX Vendors

justboltons.com BwoodyPerformance.com Granger Chrysler Jeep Dodge RAM OffRoadAlliance.com/ solisracinggroup.com Mark Dodge.com AirRyd.com
Back
Top