DEAL Ram TRX Driveshaft Group Buy! East Coast Driveline (CLOSED)

[Nick797]

We all know and love the problem.. you guys asked so I reached out about doing a group buy and here is what we came up with!

Would be the Aluminum 1500+ HP version


X5 they will be at “1395” per*-- 100 off per

X10 they will be at "1245" per-- 250 off per

X15 they will be at "1145" per-- 350 off per

$65 For shipping.



Committed to Group buy

1. Krewton
2. Twisted Pair
3. LouDogg
4. John from Monterey Transmission
5. Johnny@JustBoltOns
6. Cmonman02
7. compros
8. @bad&boujee
9. Bjammin101
10. TheDude
11. Eighty
12. Rook_376
13. GC34
14. BuckeyeROC
15. After 15 i stopped counting and its a "free for all" until tommorow at 11:59


Group buy will close on 5/15/2025

Comment if you are interested.


Alright, We are close to 15.
Lets get this moving... If everyone can pay at their earliest... Pat at ECD is already working on some shafts. I would think all of these orders can be fulfilled within a week or so's time. They will be processed in the order received. I am capping it to 15 for right now, but if marked sold just email me.

East Coast Driveline Ram TRX (RAM-TRX.COM GROUP BUY)

Photo is generic. This is for a Ram TRX 1500+ HP NO CLUNK Driveshaft. Instructions are posted on the normal item description. ETA roughly 1-2 Weeks from 5/15/2025. Please only checkout via this link if you are part of RAM-TRX.COM Group Buy...

797performance.com

East Coast Driveline 2021-2024 Dodge Ram 1500 TRX 6.2L Driveshaft (No More Clunk)

Lifetime warranty on welds, 1 year warranty on u-joints. How does this fix the clunk? The stock slip yoke is a mix of aluminum and steel parts. It has a steel yoke shaft going into an aluminum sleeve that wears out prematurely and causes the clunk. This upgraded setup is made of only HD...

797performance.com

 

[SandBlastard]

@RamCares will you buy me a new driveshaft since all your "solutions" do not work?

 

[Nick797]

@RamCares will you buy me a new driveshaft since all your "solutions" do not work?

Doubtful, I can't even get a cluster for my truck lol

 

[Krewton]

Interested

 

[Georgia TRX]

what version of the driveline is being offered?

 

[Twisted Pair]

Interested

 

[Eighty]

It appears that this is for the aluminum 1500+ HP version (normally $1495).

How involved is it to remove/transfer the yokes?

 

[Jakerx]

It appears that this is for the aluminum 1500+ HP version (normally $1495).

How involved is it to remove/transfer the yokes?

RAM TRX FLANGE YOKE SWAP Instructions
1. Remove the Flanges from OEM Shaft
• Locate the retaining clips that hold the U-joint in place. These are usually located inside the yoke or on the U-joint caps.
• Use needle nose pliers to remove the retaining clips. Be careful, as they can sometimes be difficult to remove.
• If the U-joint is rusted or difficult to remove, use a hammer and a screwdriver or pry bar to gently tap the U-joint out of the yoke.

2. Press Out the U-Joint:
• Use a U-joint press or a C-clamp to press out the U-joint from the driveshaft flange yoke. Place the press on one side of the U-joint and press the cap out of the yoke. ***Be careful not to press the flange "ears" and bend them inwards. This will prevent you from being able to install onto new drive shaft properly.
• Once one cap is removed, repeat the process for the other side.

3. Clean the Flange Yokes:
• Clean the inside of the yoke to remove any debris, rust, or old grease. This will ensure a smooth fit for the new U-joint.

4. Install the Flanges onto the New Driveshaft U-Joints:
• Position the new U-joint in the flange yoke and insert the new bearing caps into the U-joint ends.
• Use the U-joint press or C-clamp to carefully press the new bearing caps into place. Make sure the caps are fully seated and the U-joint moves freely.
5. Install New Retaining Clips:
• Install the new retaining clips that came with the new U-joint. Ensure they are properly seated in the grooves of the bearing caps. If not properly seated in the grooves this will cause vibrations in the driveline. Make sure the u-joint is centered in the flange and caps in all the way.

 

[Nick797]

Thanks ^^^^

Updated the list

 

[LouDogg]

@Nick797 Interested!

 

[Bjammin101]

Interested if we can get 10+ on this. Is it posted on Facebook or anything to get more interest? My clunk is pretty terrible being in the hot weather...

 

[Nick797]

Interested if we can get 10+ on this. Is it posted on Facebook or anything to get more interest? My clunk is pretty terrible being in the hot weather...

I try to stay off the Facebook group because it ends up turning into a debate and I honestly do not have the man/will power to deal with that lol but I will give this a shot anyhow..for the people!

 

[bad&boujee]

We all know and love the problem.. you guys asked so I reached out about doing a group buy and here is what we came up with!

Would be the Aluminum 1500+ HP version


X5 they will be at “1395” per*-- 100 off per

X10 they will be at "1245" per-- 250 off per

X15 they will be at "1145" per-- 350 off per

$65 For shipping.



Committed to Group buy

1. Krewton
2. Twisted Pair
3. LouDogg
4.
5.
6.
7.
8.
9.
10.

Group buy will close on 5/13/2025

Comment if you are interested.

East Coast Driveline 2021-2024 Dodge Ram 1500 TRX 6.2L Driveshaft (No More Clunk)

Lifetime warranty on welds, 1 year warranty on u-joints. How does this fix the clunk? The stock slip yoke is a mix of aluminum and steel parts. It has a steel yoke shaft going into an aluminum sleeve that wears out prematurely and causes the clunk. This upgraded setup is made of only HD...

797performance.com

I will join!!! i am interested. Hopefully we can get to 15... i bet we can

 

[RoNiN]

@Nick797

Is there an option for a Raptor ?

 

[IdahoKTM]

@Nick797

Is there an option for a Raptor ?

Does the Raptor have the clunk?

 

[RoNiN]

Does the Raptor have the clunk?

Nope, but I’m trying to get the truck ready to run Baja the end of the year or for sure running next year.

I prefer to upgrade parts before suffering a failure on the trail. Also it’s a pretty simple swap so I feel quite accomplished with my success.

 

[Mark McAwesome]

I’ve already purchased the rear, could there be a discount towards upgrading the front?

 

[Nick797]

I’ve already purchased the rear, could there be a discount towards upgrading the front?

Absolutely, PM me!

@Nick797

Is there an option for a Raptor ?

I am sure we can do one for ya!

 

[Bjammin101]

I try to stay off the Facebook group because it ends up turning into a debate and I honestly do not have the man/will power to deal with that lol but I will give this a shot anyhow..for the people!

makes sense and I don't blame you at all. Facebook does suck for that. It's just people posting stupid stuff like their new wheels they got and whoever they bought them from is the best shop in the entire world. lol.

 

[Nick797]

makes sense and I don't blame you at all. Facebook does suck for that. It's just people posting stupid stuff like their new wheels they got and whoever they bought them from is the best shop in the entire world. lol.

Haha, I posted it anyway...see what happens! And What I noticed is people on Facebook when i post a good deal or something that we've got in stock that's hard to get they come at me with some kind of an aggressive manor like I am out here trying to rip people off. Everyone on this forum is great to deal with and I never run into that, its a bit of a tighter community.