Pwr oil cooler

Fifty

Nothing for Fifty
Joined
Sep 18, 2021
Messages
3,413
Gallery
403
Reaction score
4,507
Location
NorCal
Current Ride
Shoe leather express
Current Ride #2
'18 Colorado ZR2 Long Travel
Military
Zookeeper
Hey everyone.

The oil cooler from pwr is available!!!

Please do me a little favor, let them know that Charles showed you.

I begged and begged and Tyler went out on a limb for me to get this made and made fast.

If this sells well, they will make the heat exchanger for our intercooler coolant.

 

Attachments

  • IMG_7366.jpeg
    IMG_7366.jpeg
    353.1 KB · Views: 207
Hey everyone.

The oil cooler from pwr is available!!!

Please do me a little favor, let them know that Charles showed you.

I begged and begged and Tyler went out on a limb for me to get this made and made fast.

If this sells well, they will make the heat exchanger for our intercooler coolant.

this bolt right up to OEM location?
 
Any cruising data available or on the way? Given the thermostat does that mean this setup would just be better at keeping up with the heat being thrown at it over stock? (yes) but by how much?
 
How hard is this installation to do? Obviously I would just do it during an oil change.

Does this change total oil capacity in any meaningful way?

My oil definitely gets hot while towing my camper up mountains in +90° heat. I worry about because it definitely gets a lot hotter than that here in AZ.
 
The core is definitely waaaaay better. Fits in Oem location

I’ll see if I can get the mu rating on the core.

But yea, from what I know about radiators and intercoolers going from Oem quality cores to the type of core pwr the heat reduction and pressure change is way better,

I’ll see if pwr has any specs they can release.

Everyone is at sema, but if you email them and tell them that Charles told you about it and want some info, Tyler will get back to you and get you the specs for sure!!

But he is in Vegas at sema with everyone for another day or two!
 
Sorry for the limited response. I’m still here.

wragth worked with xineering to get the plugs so no more warning lights for the suspension.

My truck would get the engine oil so hot just driving on the freeway at 55 mph…


So this plug and play cooler is only going to help!!
 
Hopefully they make the heat exchanger too, there are already a few tanks on the market but PWR welds look nice. I wouldn’t mind a 3+ gallon PWR tank and heat exchanger combo, BINGO. Take my money. @Fifty
 
I love it, but the people who thought Entropy radiators were expensive at just under $1500 are going to hate the price on this.
 
I’m still not sure that’s the price. They just put it on the website for me the other day it might be just a placeholder dollar amount.
 
I’m still not sure that’s the price. They just put it on the website for me the other day it might be just a placeholder dollar amount.
Is the price at $999 updated now? I’m pretty interested. It’s a lot of money but damn .. I’ve had oil temps at 253°F and that was before my light bar hahah.
 
I had over 270 and stock front end and it wasn’t hot out and I was just cruising on a highway.
Stock is lacking

I’m not sure what the final retail is. I’m hoping to hear from them today .
 
I had over 270 and stock front end and it wasn’t hot out and I was just cruising on a highway.
Stock is lacking

I’m not sure what the final retail is. I’m hoping to hear from them today .
DAMN! highest i've seen mine was 208 and that was beating on it also in stop and go traffic in Florida heat during the summer.
 
I had over 270 and stock front end and it wasn’t hot out and I was just cruising on a highway.
Stock is lacking

I’m not sure what the final retail is. I’m hoping to hear from them today .
Damn! Mine was looking for a camp site in crested butte, going slow in 4 low. That’s crazy. But alright awesome. I’m definitely interested in one.
 
Fifty I ordered one and put "Charles from Ram TRX forum referred me" in note section.
Thank you.

I don’t get any kick backs, but it helps me influence parts companies to make stuff for our trucks

Like the helldiver
 

Attachments

  • IMG_7405.png
    IMG_7405.png
    1.4 MB · Views: 57
Back
Top