Oil filter number

[JayRay]

Greetings all, does anyone know the oil filter number the truck takes. Picking the truck up today and want to grab one for the first oil change! Thanks in advance.

 

[thewrx]

Interested, would assume same as hellokitty’s have, maybe more capacity though.

 

[tortolabob]

I have the same question can't seem to find the filter number easily... maybe someone who has done the first change will respond to us.

 

[Jester]

According to service notes 4884899AC

 

[RobR651]

MO-899 (Mopar) I believe

 

[RobR651]

MO-041 is the SRT version of that filter. I believe it has an anti drain back valve

 

[RobR651]

The hellcat forum has several threads about both filters. The mopar one is a good filter, the SRT one is a little better.

 

[Hellasaurus]

You can use a Fram 10060 series filter or a Fram HP18 High Performance filter.

 

[JayRay]

Thanks to all for the help!

 

[tortolabob]

Yes, Thanks for the help...Everyone. My TRX is still running great with no leaks or loose bolts so far but I only have a few hundred miles on her.

 

[VinnyTRX]

I just did a search and this came up...Engine Oil Filter - Mopar (4892339AB)​

 

[VinnyTRX]

I know that the TRX factory oil filter is the MO-899 but I'll have some left over MO-339 (4892339AB) filters when I trade in my 2019 Ram 1500 Limited. I wonder if I could use this filter on the TRX? I did a search and I do see that the TRX is listed as one of the vehicles that could use the MO-339. However, the MO-339 is much smaller in size than the MO-899. Thought ?

 

[RobR651]

I know that the TRX factory oil filter is the MO-899 but I'll have some left over MO-339 (4892339AB) filters when I trade in my 2019 Ram 1500 Limited. I wonder if I could use this filter on the TRX? I did a search and I do see that the TRX is listed as one of the vehicles that could use the MO-339. However, the MO-339 is much smaller in size than the MO-899. Thought ?

View attachment 7126

I’d use the designated filter. Last thing you need is some mechanical gremlin to show up and FCA points to your “incorrect” filter

 

[MrLiou168]

Can anyone confirm that the MO-041 woks 100% with our trucks? About to do my first oil change...

 

[JayRay]

The factory Mopar filter is MO-899, but I have read that the MO-041 is a superior filter designed for the SRT Viper, but otherwises identical in terms of size and thread. You should be go to go. Don't get a hernia taking off the dune guard!

 

[JayRay]

I just did a search and this came up...Engine Oil Filter - Mopar (4892339AB)​

 

[MrLiou168]

Thanks guys! Going with 041.

 

[JayRay]

Thanks guys! Going with 041.

Poke around under there while you are changing the oil. Check all the gearboxes. They will probably be a little low. Also, OkieTRX80 put out an excellent list of technical bulletins to review under NightMares post "Ram finally put out a TSB". Good luck