Mods I've done (updated thread) ‼️

[Smoke king]

1. Tonneau Cover (Hard) 82215227AD (Switched Cover) NOW USING
Retrax PowertraxPRO XR
2. Black front skid plate 5ZB47GXHAA
3.Bed extender 82215724
4. ️Air deflector 82215476 Removed️
5. Mopar oem rain Guards
6. Ceramic tint 20% all around
7. 37x13.50r20 nitto tires 20 x 9 20 offset covert fuel rims
8. Weather Tech MUD Flaps
9. (4) Mopar offroad 5 inch lights for Rambar. 82215274AD
10. Mopar Rambar Light brackets. #82216127AA
11.Hood Brackets PART#: SDHQ-33-1206-G5-TRX
12. Mopar 3" lights for the ditch lights
13. 7" oracle lights for behind the grill
14. Brawler Fab behind the grill kit
15. Oracle light bar Yellow front bumper
16. Tinted Headlights, rear, mirrors, and third brake light with Lux Concepts Headlight tint
17. Tazer purchased from Brawlerfabs @Boosted
18. Bumper plugs for the plate

 

[Bavanew]

Hi, can you confirm that those mudflaps will fit 100%.? This topic was recently discussed in a different thread and the general consensus was that no mudflaps were yet available through Ram.

 

[marksouth]

Couple similar items for me... got the bed extender, tri-fold tonneau cover coming in today, Rhino recover strap and trailer hitch lock.

Curious to see how mud flaps fit. I'm 50/50 on those, but mainly because if I do that, I was the right fit and look.

Only item I'd be a little worried about is the air deflector. TRX had a slightly different contour on the hood than a regular 1500, and I'd be concerned about it deflecting air flow up over the hood air intake for the SC.

 

[Smoke king]

Hi, can you confirm that those mudflaps will fit 100%.? This topic was recently discussed in a different thread and the general consensus was that no mudflaps were yet available through Ram.

So I got this from the TRX accessories which gives you the part number for with or without factory flares. I'm assuming as long as you use the part number with fender flares you should be good! I asked the dealer when ordering them they said that they should work but won't be able to confirm till my truck arrives or if someone would take a picture of there fender underneath where the holes are I can place a picture of the mud flaps tomorrow to compare

 

[Smoke king]

So I got this from the TRX accessories which gives you the part number for with or without factory flares. I'm assuming as long as you use the part number with fender flares you should be good! I asked the dealer when ordering them they said that they should work but won't be able to confirm till my truck arrives or if someone would take a picture of there fender underneath where the holes are I can place a picture of the mud flaps tomorrow to compare

 

[Smoke king]

Couple similar items for me... got the bed extender, tri-fold tonneau cover coming in today, Rhino recover strap and trailer hitch lock.

Curious to see how mud flaps fit. I'm 50/50 on those, but mainly because if I do that, I was the right fit and look.

Only item I'd be a little worried about is the air deflector. TRX had a slightly different contour on the hood than a regular 1500, and I'd be concerned about it deflecting air flow up over the hood air intake for the SC.

Ya I saw that as well so I figured I'll order it and worse case just return it if it doesn't fit!

 

[Smoke king]

Hi, can you confirm that those mudflaps will fit 100%.? This topic was recently discussed in a different thread and the general consensus was that no mudflaps were yet available through Ram.

I responded below to myself for you by accident!

 

[Smoke king]

Here's my build sheet that was modified in November! I was told that that's usually done to speed up the order if there out of stock of the bed cover I ordered

 

[Hellasaurus]

Can’t wait to see if they all fit.

 

[topgun]

How is that cab protector going to fit with the Rambar?

 

[Smoke king]

How is that cab protector going to fit with the Rambar?

I plan on removing the ram bar!

 

[Bavanew]

I responded below to myself for you by accident!

I assumed as much. We'll, I'm certainly interested in knowing how they fit when you get them.

 

[Smoke king]

Here are the front and rear heavy-duty mud flaps! Anyone that got there TRX if you can confirm or place a picture in here of the hole pattern behind your tire we can see if these fit.

 

[Agonza11]

My order was placed in August #2278. Some how in November it got modified from just having a tri fold bed cover to getting the ram bar and tire mount
Long story short I went with all OEM parts and ordered the $900 hard tri fold bed cover and a few other things! Here are the Accessories I ordered and there part # if anyone is interested !
1. Tonneau Cover (Hard) 82215227AD
2. Black front skid plate 5ZB47GXHAA
3. Cab Protector 82215495AC
4. Heavy duty slash guards (Rear 82216216AA)
(Front 82216217AA)
5. Bed extender 82215724
6. Air deflector 82215476
I also included some screen shots
Total is $2,100 - $2,200

Do the splash guards fit the Trx?

 

[Bavanew]

Here are the front and rear heavy-duty mud flaps! Anyone that got there TRX if you can confirm or place a picture in here of the hole pattern behind your tire we can see if these fit.

Mine will be in the shop until Saturday. If no one chimes in by then, I'll check it out.

 

[Smoke king]

Mine will be in the shop until Saturday. If no one chimes in by then, I'll check it out.

Thanks in advance

 

[RBGP_TRX]

Here are the front and rear heavy-duty mud flaps! Anyone that got there TRX if you can confirm or place a picture in here of the hole pattern behind your tire we can see if these fit.

I do like those Mud Flap, but I doubt with the flares, those pre molded won’t line up. It would be great if they do, as I want those same ones.

 

[Smoke king]

I do like those Mud Flap, but I doubt with the flares, those pre molded won’t line up. It would be great if they do, as I want those same ones.

I'm crossing my fingers as with my hellcat 16,19, and wide body 2020 mud flaps all lined up just fine! Also it was in the new accessories section for the TRX! One can only hope but if not I'll just send them back and wait for the right 1s

 

[RBGP_TRX]

I'm crossing my fingers as with my hellcat 16,19, and wide body 2020 mud flaps all lined up just fine! Also it was in the new accessories section for the TRX! One can only hope but if not I'll just send them back and wait for the right 1s

That would be great. I drive about 20miles of gravel a day, and most off road tires throw gravel pretty bad, and flaps really help keep rock chips to minimum.

 

[Smoke king]

Here are the front and rear heavy-duty mud flaps! Anyone that got there TRX if you can confirm or place a picture in here of the hole pattern behind your tire we can see if these fit.

Update mud flaps don't fit I'll go to the dealership tomorrow and see what my options are