Installing Rigid Adapt 50 - Rigid SRQ Midnight Floods- Rigid Rock Lights

[TReX-RAM]

Here is the side spreaders OFF

View attachment 17344

here is the side spreaders ON

View attachment 17347

here is the rear diffusers OFF

View attachment 17345

here is the rear diffusers ON

View attachment 17346

here is the side spreaders and the rear diffusers on at the same time. IM STANDING ROUGHLY 30’ AWAY. You can notice some shadowing at around the 11:00 and 1:00 position. I do not have the adapt bar and with it on, it does help close that gap, but it is more dim in that spot regardless as it’s a little bit of a dead spot.

View attachment 17348

here is me standing about 50-60 ft away, getting near the drop out of the lights full effectiveness

View attachment 17350

once I get the adapt sorted I’ll render my full opinion and take more shots of it. This is all I could get for now, the camera glare is terrible.

View attachment 17349View attachment 17351View attachment 17352View attachment 17353

killing it with that set up, very nice!

 

[Whipcat]

Update on the rigid adapt. Somethings up with it, got an RMA gonna have to get another sent to me for replacement.

 

[Whipcat]

I decided to add 2 more SL-R spreader lights, this time flush mount for the bumper.

I wanted to wire up the red halo backlight to the brake lights. Success!

if anyone wants to know the wire for the brake light it is the white and green wire.

I’ll get some night shots tonight showing the new lighting.

 

[Whipcat]

Here’s the night shots with everything now that the new lights are added

Here are is the front of car with stock headlights.

here is the front of car with stock headlights AND the Adapt 50 on full flood.

here is the front of car with stock headlights AND the Adapt 50 on full spot

here is rear of car no lights

here is with the new SR-L Spreaders in the bumper

here is everything all full sunlight. The adapt IS NOT ON

 

[Whipcat]

here are the rear red halos on the SL-R spreaders working with the brake lights. Really like it!!!

Decided to add some rock lights also. Got bored and I think they look cool, no driving all the time, but for the occasional look flashy, I like it.

and for a usefulness feature the white light is nice if you gotta mess under your truck at light.

 

[TReX-RAM]

Here’s the night shots with everything now that the new lights are added

Here are is the front of car with stock headlights.

View attachment 18040

here is the front of car with stock headlights AND the Adapt 50 on full flood.

View attachment 18041


here is the front of car with stock headlights AND the Adapt 50 on full spot

View attachment 18042

here is rear of car no lights

View attachment 18043

here is with the new SR-L Spreaders in the bumper

View attachment 18044

here is everything all full sunlight. The adapt IS NOT ON

View attachment 18046

This is killer, all of it. You nailed every angle Including the rock lights. Good job.

 

[Whipcat]

This is killer, all of it. You nailed every angle Including the rock lights. Good job.

thanks, everything is clean and tight. All the wiring is nice and neat underneath. All the auxiliary switches are setup right.

just gotta sort the Adapt bar and it’s setup.

I did order the baja led pocket kit also to replace the stock fog lights.

I have the S2 pros coming, 2 x cornering lights on each end and then 2 x driving combos for the inner set.

 

[TReX-RAM]

You get the light bar situation fixed yet?

 

[Whipcat]

You get the light bar situation fixed yet?

nah. My second son was born this past Saturday and I’ve been busy as you can imagine.

I am pulling it tomorrow, I have an RMA number from rigid already. So I’m sending it back soon.

I’ll update once that’s sorted

 

[TReX-RAM]

nah. My second son was born this past Saturday and I’ve been busy as you can imagine.

I am pulling it tomorrow, I have an RMA number from rigid already. So I’m sending it back soon.

I’ll update once that’s sorted

Well, are you still changing diapers (congrats by the way) or did you finish the setup with the 50" Adapt? I have the 40" in my cart right now. I am trying to figure out if I should ask the wifey first.

 

[Whipcat]

Well, are you still changing diapers (congrats by the way) or did you finish the setup with the 50" Adapt? I have the 40" in my cart right now. I am trying to figure out if I should ask the wifey first.

still changing diapers.

The light bar was sent out to them only a week ago. I got mega distracted. Had some other crazy shit go down. Got COVID, my whole office got COVID, had a good friend and employee actually pass away from it. Terrible situation. And just picking things back up at work has been a chore. But reasonably back in the saddle again.

the light bar worked in all matters except for the gps sensors, if you try and transition from spot to flood the voltage has an issue and it goes into like a limp mode where only some lights work and other dont.

for another cool update, I did just pick my TRX up today from my local builder. Had a 2.85 pulley installed and tuned.

now it’s got an extra 100whp. It definitely has another kick in the ass driving around. Drivability is perfect, shifts a little smoother and don’t notice much else until you stomp it. Raining allot today so haven’t launched it yet. But wil do tonight.

 

[TReX-RAM]

still changing diapers.

The light bar was sent out to them only a week ago. I got mega distracted. Had some other crazy shit go down. Got COVID, my whole office got COVID, had a good friend and employee actually pass away from it. Terrible situation. And just picking things back up at work has been a chore. But reasonably back in the saddle again.

the light bar worked in all matters except for the gps sensors, if you try and transition from spot to flood the voltage has an issue and it goes into like a limp mode where only some lights work and other dont.

for another cool update, I did just pick my TRX up today from my local builder. Had a 2.85 pulley installed and tuned.

now it’s got an extra 100whp. It definitely has another kick in the ass driving around. Drivability is perfect, shifts a little smoother and don’t notice much else until you stomp it. Raining allot today so haven’t launched it yet. But wil do tonight.

Wow, that sucks and sorry to hear about the Covid outbreak. We had a similar situation happen in January, the entire office got Covid and one of my employee drivers passed away. Not fun at all.

I went back thru all of your light pics today, your set-up is perfect. I have a 40” Adapt in my cart right now. I am trying to justify to my wife a $2k purchase for something that I will only use 2-3 times a year. I have a feeling she will be getting some new purses in the very near future!

I see a lot of folks doing the pulley and tune, that is tempting but I prefer to keep the warranty for now. That extra power would be even more fun though.

 

[Whipcat]

Wow, that sucks and sorry to hear about the Covid outbreak. We had a similar situation happen in January, the entire office got Covid and one of my employee drivers passed away. Not fun at all.

I went back thru all of your light pics today, your set-up is perfect. I have a 40” Adapt in my cart right now. I am trying to justify to my wife a $2k purchase for something that I will only use 2-3 times a year. I have a feeling she will be getting some new purses in the very near future!

I see a lot of folks doing the pulley and tune, that is tempting but I prefer to keep the warranty for now. That extra power would be even more fun though.

when it comes to my things I’m pretty OCD. I tried to think through all the wiring and I wanted it clean AF.

get what you want!! Enjoy life!! Wife will survive, just make sure she gets some toys also. As you already know, she knows what you spend, just make sure you throw her some cash to splurge as well. Otherwise, tell her to suck it up!! Papa is getting what he wants.

If this was my only car I wouldn’t have boosted it. But I have a few other rides to mess with. And I trust my builder and tuner heavily. He has been working on my Hellcat and other stuff for the past 4 years. Work is top notch. I also know the service manager at my local dodge dealership and we are good friends. He takes care of all my fleet vehicles and personal stuff. So other than my engine I’m covered for all the warranty stuff.

 

[Whipcat]

Still waiting on rigid

 

[702Man]

Any idea on total height of truck with light bar? Great setup!

 

[Whipcat]

Rigid approved my RMA. They said the lightbar is backordered and it will ship Sometime in January.

I also added the Oracle lightbar kit on the front bumper also. I literally can’t think of anything else to do to this truck. I think I banged out every single mod as tastefully as possible.

 

[Whipcat]

Scratch that. I am waiting for the borla exhaust to release and that is going on instantly when k get it.

 

[702Man]

Do you know the height of the truck with light bar? I love your set up but concerned about fitting in my garage with that setup.

 

[DIABLOPOWER702]

Wasn’t sure if it needed 4 roll bar mounts, the light is heavy. If two can do it, I’ll take the other 2 off

Your truck looks awesome. Would be interested in the light output.

 

[Whipcat]

Do you know the height of the truck with light bar? I love your set up but concerned about fitting in my garage with that setup.

I can measure it when I get the lightbar back. I’m pretty sure if it’s just a “normal” garage it’s not gonna fit. But I’ll measure for you.