- Joined
- Jul 14, 2020
- Messages
- 2,888
- Gallery
- 779
- Reaction score
- 2,295
- Location
- Central Florida
- Current Ride
- 2022 Ram TRX - AWE Exhaust, J&L Catch Can, Sentry CT Tonneau Cover, Tons of Rigid Lights, Weld 20x9 +0 Black Ledge Wheels, 35.5 BFG KO2s, Eibach Front Leveling Springs, aFe Pro 5R Intake.
- Current Ride #2
- 2005 Mustang V8 Swapped / Insane Long Mod List.
NEW Hellwig Specific TRX Sway Bars (Front & Rear) - Direct Links to Order Them Below.
Checkout @KnightMare's thread for TONS of great information: https://www.ram-trx.com/threads/first-trx-with-a-rear-swaybar-handles-amazing.2794/
- Hellwig Front Stabilizer Sway Bar For 2021-2023 Ram TRX - 7795
- Hellwig Rear Stabilizer Sway Bar For 2021-2023 Ram TRX - 7794
From Customer - Post link: https://www.ram-trx.com/threads/hel...e-end-links-for-2021-ram-trx.2919/post-135061 - Just to help you guys out, I bought one from you and installed it on my 2022. I started on the passenger side, I used the supplied sway bar bracket and centered it so I had plenty of metal around the holes I drilled. There are already some holes from the factory in the wrong place. I then moved to the drivers side and measured off of the passenger side to get the brackets even and then drilled my holes on that side. I attached the brackets with the supplied bolts and some lock nuts I got from the auto parts store. There is not much room to get them started but it can be done. Last, I leveled the sway bar and attached my end links. I used the recommended bolts and bushing inserts from this thread. I bought them at McMaster Carr. This was not a super easy job, but it was not that complicated either with the correct tools and hardware.
I have put about 500 miles on my setup and all the hardware is still tight!
McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.www.mcmaster.comView attachment 28828McMaster-Carr
McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.www.mcmaster.com
You will need to source 2 bolts to make the install possible. Luckily for you the bolt you need is on your TRX already, you just need a longer one. All the info is in the video. BOLTs needed: https://www.amazon.com/M10-1-5x60-Metric-Class-Flange-Screws/dp/B01GUEPRIE?tag=ramtrx05-20
M10-1.5x60 or M10-1.5x65
Checkout @KnightMare's thread for TONS of great information: https://www.ram-trx.com/threads/first-trx-with-a-rear-swaybar-handles-amazing.2794/
The upper mount for the sway bar end links are being used for a bracket for a wiring harness going to the rear TRX lights, sensors, and tow plugs. I put the bracket back when I did my install. When you get the longer bolt that I discuss above, you will put the bracket back in its factory position, then do washer, endlink, washer bolt. Picture of what I am talking about is below.
Last edited: