Favor From Anyone Who Received Their Truck Already

n8er

TRX Fanatic
Founding Member
Joined
Feb 25, 2020
Messages
185
Gallery
46
Reaction score
537
Location
Minnesota
Any chance I can get one of you guys to pull off a wheel and check the stamping on back to get the offset of the wheel? Want to start getting an idea of what different setups will look like with different sizes, offsets, etc. We already know the bolt pattern is 6x5.5", but haven't seen anyone post the actual stock offset on the wheels. On the back of the wheel, there will be different stamps. One of those will have "ET" and then a number. If someone could pull a wheel and take a pic and post it, I'd GREATLY appreciate it! Then I could start to pull together some different setups to test fit on the truck, and I'll post some pics to give an idea of how the stance fits on a truck. Here are some sample pics:

size-and-offset-red-2.jpg
BBS_Wheel_offset_stamp-copy.jpg
 

Attachments

  • 1611081864286.png
    1611081864286.png
    1.5 MB · Views: 44
@Johnny@JustBoltOns Know of any lightweight options to knock down that 103.5 lbs?
I would say Welds or VenomRex should definitely be lighter than stock. Methods might be as well.

Depending on how long my TRX order sits in VON / VIN limbo, I was going to pick a set of Weld Ledges in 20x9 0 Offset for the Rebel and see how much lighter they are with a set of 35x12.5R20 KO2s (if I can find the tires as they are so backlogged in this size) since they would also fit the TRX.

I'll either end up doing Bronze or Gunmetal finish since both my Rebel and TRX are Hydro Blue.

1611083074222.png

1611083085429.png

1611083093538.png


 
I've been thinking about getting the following for my daily setup.. would only be around 82lbs per corner.

Fuel Shok 18x9 -12 offset 28 lbs
Bridgestone Dueler A/T Revo 3 LT295/70R18 54 lbs

Shedding weight at the tire will provide far more advantage than just losing it from the wheel.
That's a nice setup!

The KO2s would between 65 and 67lbs per a tire depending on 18s / 20s in 35x12.5. Usually all I ever run and they have done me well.

Fuel Shoks are great looking wheels, I stopped selling that brand as there has been finish peeling issues in the past with some of their styles.
 
I would say Welds or VenomRex should definitely be lighter than stock. Methods might be as well.

Depending on how long my TRX order sits in VON / VIN limbo, I was going to pick a set of Weld Ledges in 20x9 0 Offset for the Rebel and see how much lighter they are with a set of 35x12.5R20 KO2s (if I can find the tires as they are so backlogged in this size) since they would also fit the TRX.

I'll either end up doing Bronze or Gunmetal finish since both my Rebel and TRX are Hydro Blue.

View attachment 2728
View attachment 2729
View attachment 2730


Oh I like those... I think black would look good
1611084255824.png
 
Oh I like those... I think black would look good
View attachment 2732

Hell yeah, we really need some fun colors on the TRX lineup. Digging the green!

I do agree the Black Ledge wheels would look good on the blue, just confirming they weight about 27lbs but if I go with a KO2, I'm not saving too much in weight.
 
Anyone know what the non beadlock wheels weigh?
 

Latest Discussions...

RAM-TRX Vendors

justboltons.com BwoodyPerformance.com Granger Chrysler Jeep Dodge RAM OffRoadAlliance.com/ solisracinggroup.com Mark Dodge.com Forced Induction Interchillers SDHQ Motorsports
Back
Top