Colorado Cars and Coffee, Lets do it "TRX Style" Sat June 4th

Damn! I didn't know you were seriously headed over. We took off around 7 after we finished the pizza from the food truck. Good stuff if you're still around!
Haha no worries, I’ll see you around eventually. That pizza food truck smells bomb, looks like they have a smoker.
 
I want a ride! 🙋🏻‍♂️I need to make sure these things are faster than my Raptor 😂
From a former 2020 Raptor owner trust me, the TRX is faster!
A0E67EE2-2BF2-40F8-B9FC-259B10F3CF49.jpeg
 
I’ll try to make it on the 4th. Any of you have AWE exhaust on your truck? Would love to hear one in person
 
I’ll try to make it on the 4th. Any of you have AWE exhaust on your truck? Would love to hear one in person
Borla on mine.
Hopefully we will get someone with an AWE for comparison!
 
Borla on mine.
Hopefully we will get someone with an AWE for comparison!
I have AWE sitting in my garage but can’t find a shop to install it earlier than July. I’m itching to hear it! Where’d you go for your install?
 
I have AWE sitting in my garage but can’t find a shop to install it earlier than July. I’m itching to hear it! Where’d you go for your install?
I did it myself, in the garage and its not too bad, takes about 2 hours. I have done a bunch of catback exhausts on my trucks over the years. Usually Corsa, but this time I went with Borla just to see the difference.
 
As I mentioned on the other Colorado thread I won't have my truck back from the performance shop until the 6th, but thinking about it I can still stop by and at least say what's up. It may be some good content for the youtube videos I film and never post, lol 😂
 
Borla on mine.
Hopefully we will get someone with an AWE for comparison!
Not an AWE, but here is the initial startup of mine after some of the mods. I have the stainless works long tube headers with the Magnaflow XMod exhaust (extreme delete). Keep in mind this was the first startup with no tune being done yet.

https://www.instagram.com/tv/Cdyi_CZJiWb/?utm_source=ig_web_copy_link

SRT AUTOWORKS CUSTOM GRIPTEC 2.75 UPPER PULLEY
ATI 10% LOWER PULLEY
FUEL INJECTOR UPGRADE / ID1300X
BOOST A PUMP
BOOST REFERENCE ADAPTER
CRANK PINNING KIT
GATES GREEN RACING BELT
180 DEGREE THERMOSTAT
Forced Inductions Supercharger Spacers + Thermal Blankets
Kong Performance Ported Snout + Bearing plate / Max Effort Full Port
Kong Performance 108mm Throttle Body
Kong Performance Super Charger Rebuild
STAINLESS WORKS RAM TRX 6.2L LONG TUBE HEADER KIT
Magnaflow XMOD exhaust (Extreme Delete)
Custom Grind Performance Camshaft
BWoody CAI
SRT Autoworks Custom Oil Catch Can
HPTUNERS MPVI2+ SOFTWARE INCLUDED WITH 6 TUNING CREDITS
UNLOCKED PCM AND BYPASS CABLE
CUSTOM TUNING E85 (PCM and TCM) by ZHTunes
 
Not an AWE, but here is the initial startup of mine after some of the mods. I have the stainless works long tube headers with the Magnaflow XMod exhaust (extreme delete). Keep in mind this was the first startup with no tune being done yet.

https://www.instagram.com/tv/Cdyi_CZJiWb/?utm_source=ig_web_copy_link

SRT AUTOWORKS CUSTOM GRIPTEC 2.75 UPPER PULLEY
ATI 10% LOWER PULLEY
FUEL INJECTOR UPGRADE / ID1300X
BOOST A PUMP
BOOST REFERENCE ADAPTER
CRANK PINNING KIT
GATES GREEN RACING BELT
180 DEGREE THERMOSTAT
Forced Inductions Supercharger Spacers + Thermal Blankets
Kong Performance Ported Snout + Bearing plate / Max Effort Full Port
Kong Performance 108mm Throttle Body
Kong Performance Super Charger Rebuild
STAINLESS WORKS RAM TRX 6.2L LONG TUBE HEADER KIT
Magnaflow XMOD exhaust (Extreme Delete)
Custom Grind Performance Camshaft
BWoody CAI
SRT Autoworks Custom Oil Catch Can
HPTUNERS MPVI2+ SOFTWARE INCLUDED WITH 6 TUNING CREDITS
UNLOCKED PCM AND BYPASS CABLE
CUSTOM TUNING E85 (PCM and TCM) by ZHTunes

That thing is going to be a beast. Can’t wait to hear your impressions. Who’s doing the work? EDIT never mind. Just saw your post in the CO thread
 
Alright CO TRX crew, time to show and shine!!!!!!!!!!!!!!!!
June 4th, 7am to 10am.
Flatirons Community Church (perfect for bunch of Hellcats!)
355 W. South Boulder Road
Lafayette CO 80026

How many TRXs can we get lined up in a row??????????
I will be there at 6:30am, or earlier.
Chime in if you can make it.

Love to show up but I go back on the road on the 3rd
 
BUMP as a reminder for all CO TRXs!!!!!!!!!!!!!!!
CC on Saturday!
 
Well FUCK!!!!!
Was hoping to have the new 20" Vossen wheels on the truck for Saturday.
Discount called and said the wheels arrived........but Vossen sent them 22" wheels!!!!!!!!!!!!!!!!!
See you guys on Sat! with my factory wheels........
 
What time are ya’ll showing up?
 
Back
Top