-44 offset to much?

Noise is nominal and don’t really hear a difference from stock. I have 37x1350s Nitto grappler ATs on fuel 20x10s ( -18 offset) level is Geiser front and back springs. No rub.
I think this is a good compromise, aggressive but not overly aggressive.
 
If you are going for the custom/ wide stance look then the -44 would be the way to go. Cutting would be required to to fit the 37 along with leveling but nothing too major. Running 35s on mine until I level.
View attachment 56420
What are your wheel and tire specs? Are those Vossens? They look so good! More pics?
 
If the brodozer look is what you’re going for then have at it. Stretched out rubber looks about as gay as the Carolina squat as far as I’m concerned. The TRX has a badass stance as it is. It can be done tastefully, but there is a fine line. Don’t be this guy…
Thats a 14" wide wheel and stretched. I have 20x12 -44 w 35" tires and it looks nothing like that shit box.
 
Going back and forth on wheels. Same wheels, one is 22x10 with -19 offset and the other is 22x12 with -44 offset. I’ll know I’ll shit for “22’s” but with 37’s I dig the look. Is -44 with a 12 inch rim to aggressive looking on the TRX? Pic below is not mine and it’s on 35’s not 37’s but they are -44 offset.
damn, that truck makes me wish I ordered Silver. every color looks good under the right light -- and every color looks bad under the wrong light :(
 
I'm unning -44 offset with 35s. No level kit or trimming done although I rub if I crank the wheel. I have no plans to trim or level as I love the look as it stands and the inconvenience is minor. Just a matter of retraining the mind of what is the acceptable amount of wheel turn.
How did they balance out? Balance beads or weights?
 
You guys running -44's, no drive up bank teller windows or fast food drive thru for you!!!!!!
But looks cool!
 
You guys running -44's, no drive up bank teller windows or fast food drive thru for you!!!!!!
But looks cool!
I roll the window down, stick my head out the window and watch for my front rims not to rub, bank tellers probably going wtf guy
 
I went with the 22x12 -44 Vossen. I did the leveling kit. No rubbing. 35x12.50-22 Nitto Ridge Grapplers
 

Attachments

  • 20230128_123714.jpg
    20230128_123714.jpg
    334 KB · Views: 159
  • 20230128_123704.jpg
    20230128_123704.jpg
    532.1 KB · Views: 160
  • 20230128_123651.jpg
    20230128_123651.jpg
    447.5 KB · Views: 159
I went with the 22x12 -44 Vossen. I did the leveling kit. No rubbing. 35x12.50-22 Nitto Ridge Grapplers
These look friggin perfect on your truck! I love the thin spikes. And concave looks cool. I am running concave wheels on my limited too. TIS544’s. The only thing is rugged terrain tires throw the rocks up your side. But you’ll get used to that… price of doing business with -44 offset.
 

Attachments

  • 282E9593-0336-41D7-8D90-CFE520D9FBD2.jpeg
    282E9593-0336-41D7-8D90-CFE520D9FBD2.jpeg
    481.6 KB · Views: 90
Looks almost as bad as a Carolina Squat IMO, feel free to Ok Boomer me... 🤣
 
For some reason, on Facebook, I keep getting these ads from a place called "Flawless Whipz"
Probably because I was clicking on wheel ads...

I was going to turn them off, but it's good for a few belly laughs daily. :ROFLMAO:
 

Attachments

  • whip 3.JPG
    whip 3.JPG
    74.7 KB · Views: 40
These look friggin perfect on your truck! I love the thin spikes. And concave looks cool. I am running concave wheels on my limited too. TIS544’s. The only thing is rugged terrain tires throw the rocks up your side. But you’ll get used to that… price of doing business with -44 offset.
I'm going with the TIS 544BM or 552B at this point in a 20x12 -44 so it will have the wide lip.
 

Attachments

  • SmartSelect_20230128_131439_Chrome.jpg
    SmartSelect_20230128_131439_Chrome.jpg
    290.4 KB · Views: 17
  • SmartSelect_20230128_145339_Chrome.jpg
    SmartSelect_20230128_145339_Chrome.jpg
    481 KB · Views: 17
For some reason, on Facebook, I keep getting these ads from a place called "Flawless Whipz"
Probably because I was clicking on wheel ads...

I was going to turn them off, but it's good for a few belly laughs daily. :ROFLMAO:
Bring me the ladder somebody I need to get into my truck!lmao
plush ride on those rubber bands I’m sure. Although cognito or whatever suspension might do the trick. In Florida Or Carolina might be cool and smooth, in Maine the roads are like someone has been bombing the place, potholes on every corner. I’ll be enjoying the ride in my new Rex here in a few months. can’t wait
 
To run a -44 or less offset you will need a level kit at the least and depending on the tire some cutting is needed (norcal cut). I did this setup on a newer chevy 2500 yesterday actually with a 3.5 lift, vertex shocks ect and had to do some cutting. If done right it doesn’t look bad.
 
I went with the 22x12 -44 Vossen. I did the leveling kit. No rubbing. 35x12.50-22 Nitto Ridge


Scott I love your set up, do you got any pics from the front of the truck looking straight down the side by chance? How much tire poke do you have? I'm looking at the same tires and same rim specs just different brand rims and want to get an idea of how it looks/functions. Was a leveling kit mandatory to not have any rubbing or did you do it just for looks?
 
I went with the 22x12 -44 Vossen. I did the leveling kit. No rubbing. 35x12.50-22 Nitto Ridge Grapplers
Looks awesome! I got the same wheel with the -18 offset, I "chickened out" on the -44...still waiting on tires to come in to set it up! Hope I am happy with what I picked! Thanks for sharing the photos!
 

Latest Discussions...

RAM-TRX Vendors

justboltons.com BwoodyPerformance.com Granger Chrysler Jeep Dodge RAM OffRoadAlliance.com/ solisracinggroup.com Mark Dodge.com AirRyd.com
Back
Top